Note:
- To find a Specific machine press (CTRL + F) and type the name of the machine
|
| |
List Of Weaving
Machines For Sale |
1 Hacoba Sectional Warper, Model USK 1000E, Year 1983,
Working Width 3.5 m, Beam
Diameter 800 mm, Press Roller, Waxing Device, Change Gear is Electric
-- 2 Hacoba Parallel Creels, Model G –
5.551, Year 1980, 840 Positions, 840 spare Ends, on 7 Levels
(12 Turnable Frames with each 35 positions – 420 each , side), Pitch 270 mm x
270 mm, Crossing Device, Leasing Device
FULLY REFURBISHED
INSTALLATION
1 x
Sizing machine SUCKER MULLER / HACOBA 1976 / 1998,
head stock working width
3200mm for max beams Ø 914mm, creel for 8 warp beams 1600mm x Ø 1000mm type
AM8, 1998. Single size bath LC3 (double dip, double nip), 1976, 11 drying
cylinders of those 7 Teflon coated, working width 2000mm x Ø 800mm, 1976,
MAHLO RMS / BA, speed 100m/min, including size kitchen and transport
equipment. 380V-50Hz.
1 x Direct warping machine KARL MAYER
type DS84/40P 1984, serial number 8932/84, parallel creel 896
cones – gauge 270mm, working width 1600mm, Ø beams 1000mm, speed 1000m/min, 26
warp beams. 380V-50Hz.
1
set Benninger Warping Machine
, Year: 1990
Sizing
machine SIZ-O-MATIC,
Producer: KARL MAYER ROTAL
- Italy, Year of production: 2004, Dimension ( mm ) : 27210 x 7050 x 3570
Working width: 1.800 mm, Number of section warp beams up to 20 (with pneumatic
breaks and automatic tension control), Flanges diameter 1000 mm
Sizing bath section: two roller squeezers, temperature control, Pre drying
section : 2 cylinders, Drying section : 4 + 6 cylinders, Size boiler: For 700
l+ tank for 1200 l, Width / diameter of warp beam: 2600 mm / 1000 mm, Drive by
the AC motor, Computer with LCD color touch screen 15“ control,
1 SIZING
MACHINE SUCKER MULLER
TYPE WN YEAR 86, ALL RENEW
IN 1999. Machine composed of:
2 Creels for 12 Beam each , 1 LC3 SIZING TROUGH double dip and double nip, 3
ton pressure. TZ4 pre-dreyer with 4 cylinders all teflonized, diam. 800 mm,
3,5 bar, 160 deg C. ZG5 dreyer unit with 5 Cylinders , diam. 800 mm, 3,5 bar,
160 deg C. Mahlo RMS IVC textometer and humidity controll, BEAMING UNIT TS H.
400 cm for Beam maximum diam. 1000 mm, and maximum H. 4000 mm. WITH THE SIZING
MACHINE THERE IS :
1 DIRECT WARPER BENNINGER, H.1800 mm, Year 86, WITH "V" CREEL BENNINGER, 640
position, gauge 27 mm, COMPLETE WITH N°48 SPECIAL BEAM.
Weaving Department With Jacquard Looms For Terry Towels:
NO. 10 Nuovo Pignone looms model TPS 538/2, 1989 year, ww 3600 mm, with
jacquard mechanical Bobbio CROMA 1344 hooks, with twin beams, warp beams 800
and 600 mm, on the ground there is mechanical Staubli 2232RS, 2 weft
accumulators on the loom type ROJ AT 1200 (average quantity is 2 weft
accumulators but on one loom is 4 and on another is 1 weft accumulator, but 2
pcs is for sure), 5 healds frames per each loom, 5000 droppers and heddles,
complete with gantry if needed, 2 warp beams on each loom single, , 2 cloth
rollers for each loom.
NO. 1 warping machine Benninger Supertronic , 1995 year, 3600 mm, with 2 x
creels 600 points
each.
NO. 1 shearing machine Mario Crosta, 1998 year, 1,70 m in very good condition
NO. 1 Staubli-Verdol mechanical (punching-copying machine) , 1989 year serial
number 88284-1-10-48 for punching of jacquard Verdol paper in very good
condition
NO. 1 Staubli type 8G00E, year 1998, electronic punching machine in very good
condition
NO. 1 Bobbio punching machine for plastic foil
BENNINGER Warping Machine
mod. SUPERTRONIC SF-P,
year 1988, work. width 3800mm, 2 movable creels with 600 points each, gauge
200mm.
1 Sizing Machine,
SUCKER/MULLER/HACOBA,
WS12, made in 1997, machine No. 1297024, flange dia. 125 cm, consisting of:
Beaming machine, 280 cm wide, * Control Simatik OP17 made by SIEMENS, *
Splitting section, * Cylinder dryer with 8 drying cylinders, 5 bar, * Heat
recovery, * Size trough SD-C, roller width 210 cm, * Warp beam frame for 9
warp beams, * Size cooking line,
1 Sizing
Machine
SUCKER, for beam-to-beam sizing or from warp beam creal, with beaming machine
type WN, No. 1284012, made in 1984, 300 cm wide, with cylinder dryer, 7
cylinders, 1 size trough with one-time dipping, type SE15, unbeaming frame, as
well as a beaming frame for 12 beams,
1 Sizing
unit compact,
At the end for sizing of
chains made from staple fibre yarns like for example cotton, wool, polyester,
viscose and mixtures thereof. Working width 220 cm, made in 2000, unwinder for
1 warp beam, 2 coating equipments for sizing, cylinder dryer, 2 cylinders with
400 mm dia, steam heated, dryer dividing zone 2 m long, 7 splitting sections
with hard-chrome plated surface, dampness measuring PLEVA, beaming machine
model 100/300, warp beam plates max. 1000 mm,
1 Sizing Machine
SUCKER MULLER, with warp
roller let-off frame for 20 warp beams, 1 cylinder drier with 10 cylinders, 1
size boiler, 2 storage tanks, double size trough, beaming machine, working
width 220cm. The machine is in excellent condition, yoc 1985/1992
1 Sizing
machine SUCKER MULLER
HACOBA-KAEV, YOC 1980,
max. distance of disk 2500 mm, 180 cm wide, beam dia. 600-800-1200 mm, sizing
speed 40-90 m/min. with following parts: warp beam frame model ANP for 10 warp
beams, tension control before trough model AB-300, trough model LC 3, 2 baths
model PIV A 23, dryer model ZT9 with 12 teflon rollersand 6 steel rollers,
heat control model ZT/LC3, waxing unit model PV, MAHLO Textometer model RMSR-
7k, storage unit, YOC 1970, cooker model MKV-R, electr. cooker model KMV-R,
mixer
1 Staple-Fibre Sizing machine
BENNINGER ZELL, YOC 1986,
consisting of: Beaming machine 260 cm beaming width, max. beam dia 1016 mm,
beam speed 5-100 m/min., MAHLO dampness control, 7 cylinder dryers 200 cm
wide, sizing trough XKL- Ecopress 5, high pressure squeezer for 180 cm warping
width, 1 pre-squeezer, 1 main squeezer, 2 diving rollers, frequency controlled
drive synchronised with beaming machine, warp beam winding frame ZWS/U with 12
positions,
1 Sizing Machine
SUCKER MULLER, made in
1977, for warp beams of 320 cm width, consisting of: Creel for 12 warp beams,
size trough type LC, with 2 double dips, 2 squeezers, 210 cm roller width,
dryer 9 cylinders, 210 cm wide, 4 of which with teflon,
1. HACOBA BRAND
(SUCKER MUILLER) SECTIONAL WARPING MACHINE,
YEAR OF MANUF. : 1996,
MODEL : USK, WORKING WIDTH : 2400 MM MAX., WITH BEAMING MACHINE, BEAM FRANGE
DIA. : UPTO 1000 MM, NUMBER OF CREEL : 504 END,
1 X HERGETH /
FEHRER NON WOVEN NEEDLING LINE 1975 / 1980.
Suitable for
interlining substrates, wipes, filtration products, medical products, cover
stock and other industrial products, weight range 15 g m2 to 100 g per m2
speed as from 35 m/min, max working width 2200 mm.
Consisting of:
OPENING AND BLENDING
1 X Hergeth Fine opener type SRRL
3 X Hergeth hopper feeder type KG CARDING 2 X Hergeth J cards fitted with web
king, working width 2000 mm
CROSSLAPPING
1 X Hergeth crosslapper with electronic clutches, input conveyor 2000 mm,
output conveyor 2500 mm
NEEDLING
1 X Fehrer tacker needle loom type NL 28, working width 2200 mm
1
x HERGETH NON WOVEN LINE, 1981
Suitable for
interlining substrates, wipes, filtration products, medical products, cover
stock and other industrial products, weight range 15 g m2 to 100 g per m2
speed as from 35 m/min, max working width 2300 mm. Steam heated
Consisting of:
OPENING AND BLENDING
e.g. 3 hopper feeders, MZ, MBK, MTO, Vibrafeed
CARDING:
double doffer card type WZW-K5-d2-R2
RAMISCH KLEINEWEFERS Point bond calendar with 2 engraved rollers.
MOHR foam saturator, INFRARED pre dryer, MOHR 2 chamber steam heated oven,
STACK of 8 drying cans , FABRIC ACCUMULATOR
EXIT into winder
1 sectional warping and
beaming machine
make HACOBA TYP USK 1000 e, year 1981, width of konus
total 2400 mm, beaming machine width between the flanges 2200 mm with 1000 mm
disc dia, creel with 220 gauge 580 positions, yarn break control and tension
control,
1 sectional warping and beaming machine
make HACOBA TYP USK 1000 e, year 1986, width of konus
total 2400 mm, beaming machine width between the flanges 2200 mm with 1000 mm
disc dia, creel with 220 gauge 600 positions, yarn break control and tension
control, sectional still on floor
NO. 1 SUZUKI SAMPLE WARPER MOD. NAS 10 S ,
YEAR OF CONSTRUCTION 1995, WORKING WIDTH 2000 mm, WITH
SUZUKI ORIGINAL , PROGRAMMER, WITH STANDARD CREEL 10 COLOURS , WITH 10 WEFT
ACCUMULATORS ROJ QUARTZ, WITH ROTARY CREEL 8 COLOURS,
WITH OILING DEVICE,
WITH BEAMING UP TO 220 CMS,
KANAMARU Sizing Machine for Spun Yarn,
Year : 1993, Model : KJS-9C, 2 size boxes, Warping Width :
90", Beam Flange Dia : Max. 1,000mm
Nos. of Cylinders : 12, Beam Stand : 10,
KANAMARU Warper, Q'nty :
complete 1 set, Year : 1993, Warping Width : 75", 700 creels, 240mm pitch, 20
Warper Beams, Fully reconditioned in year 2002
Condition: stand on mill
N. 1
Sucker Sizing Machine model WN10,
year 1986, Delivery Head working width 335 cm,
Delivery head new of year 2002, automatic regulation of speed,
7 drying cylinders, with Single size box LCI/LCIII width 180 cm, year 1972,
size box with two immersions and two squeezes with size kitchen
2 creels for beam for 12 movable sections, with 1 extra creel for further 5
sections, PIV regulator updated, some spares. Electronic humidity control with
Spares
with suction hood,
N. 1 BENNINGER DIRECT WARPING MACHINE,
working width 180 cm, year 1974, complete with V
creel, 640 cones. Rotary creel for cone change, Beam for warping, Benninger
Creel with Tensioner, Machines working
Please note that both machines are like new updated and working.
SIZING MACHINE ZELL,
YOC 1983 , overhauled in 1988 +2003, Creel : 12 positions Width 1800
mms , beam diam 800 mms, 1 Sizing box 2X2 cylinders , type ECO PRESS, Doble
warp separation , Dryer SYNCRO 4 , 8 drums teflon , width 200cms , diam 800mms
, 1 waxing device, 1 moisture control unit MAHLO type Textometer RMS 7,
bi-directional beaming, Width sizing beams mini 1300 mms , Width sizing
beams maxi 2800 mms, Beams Diameter 800 or 1000mms, In 2003, Very Important ,
the PIV device has be changed with one motor , With frequency variation ,
Electronical adjustement for warping
With a size kitchen composed : 1 tank size preparation , 1 tank for cooking ,
2 tanks reserve each capacity : 500 liters
Sizing machine, one
sizing trough, Working Width 2300mm, 18 beams, 2 drums 1 pump, with one set
warp beaming machine,
1 Sectional warping machine Benninger
- Model Ergotronic Year
1993, Width 2200 mm - Cone 1050 mm, -Ratio Cone 1:5 - diameter 800mm - speed
800 mt/min, Ben split - Leasing Reed - automatic beam unloading, Tension
control electronic creel - reserve cone - gauge 270mm, 480 cones - with blower
Magitex
01 Direct warping machine BENNIGER
type ZDA year of construction 1988, serial number 101290,
working width 2200mm, 380V-50Hz, speed 1000m/min, Ø beam flanges 1000mm, 2
reeds zigzag - 373 ends to 483 ends and 479 ends to 621 ends. With V creel
BENNINGER type GE/GCF-600, 600 working spindles Ø 305mm + 640 spare cones Ø
305mm, driven by Electro-motor, yarn stop motion GCF incorporated in the
tensionners (BENNINGER patent), yarn tensionners with central command for
opening and closing, automatic pre-tensionner, yarn cut BENNINGER, automatic
mobiles aspirators, 32 warp beams.
01 Sizing machine BENNINGER
- ZELL model BEN-SIZETEC 2ZA16 TKD 4/4 (2) BB year of construction 1999,
serial number 362706398, working width 2200mm, with complete automation of the
process by PC.
2 Creels for warp beams model ZA, each creel can take 16 warp beams Ø 1016mm
max., working width between the flanges is 2200mm, automatic brakes driven by
PC, the creels are motorised and can be placed next to each other or behind
each other.
Sizing bath: working width 2200mm, roller width 2400mm, 2 dip rolls, 2 high
pressure nip rolls with automatic regulation of the squeezing pressure, size
bath in stainless steel, automatic size supply driven by Handymat, Pleva. Wet
separator for sizing bath, Cylinder dryer type ZT4/4 with 4 Teflon coated
drums Ø 800mm + 4 drums Ø 800mm (possibility for adding 2 more drums), steam
pressure 3.5 bar - 147°C, automatic tension regulation by PC, stainless steel
aspiration top with 2 ventilators. Automatic speed control MAHLO, dry
separator, unroll device SWA. Beaming machine BB (400V-50Hz) : speed 0.4 to
160m/min, working width between the flanges 3400mm, Ø beam flanges 1100mm,
inversion of rotation sense, pneumatic beaming pressure, automatic in- and
output of the beam, extensible reed zigzag with motorised regulation. Driven
by Handymat.
Preparation kitchen : cooker 1400 L with temperature regulation, process
semi-automatic driven by PC BEN-SIZEMIX (quantity of water, temperature and
cooking time), measurement of the viscosity, storage tank 1.450 L controlled
and regulated by PC BEN-SIZEMIX.
N. 1 sectional warper KARL
MAYER BOM
3200, width 3200 mm, year 2002, air creel type GD-M 384 with 340 bobbins,
waxing box, suitable for cotton and monofilament.
N. 1
Knotting machine FISCHER POEGE-FROTTIER,
year 1982 with tying frame.
NO. 1 Sucker
Sizing Machine model WN10,
year 1986, Delivery Head working width 335 cm,
Delivery head new of year 2002, automatic regulation of speed,
7 drying cylinders, with Single size box LCI/LCIII width 180 cm, year 1972,
size box with two immersions and two squeezes with size kitchen, 2 creels for
beam for 12 movable sections, with 1 extra creel for further 5 sections, PIV
regulator updated, some spares. Electronic humidity control with Spares, With
suction hood.
NO. 1 BENNINGER DIRECT WARPING MACHINE,
working width 180 cm, year 1974, complete with V
creel, 640 cones. Rotary creel for cone change
Beam for warping, Benninger Creel with Tensioner, Machines working, Machines
are like new updated and working,.
Sizing
machine SIZ-O-MATIC,
Producer : KARL MAYER
ROTAL, Year of production: 2004, Dimension ( mm ): 27210 x 7050 x 3570,
Working width 1.800 mm, Number of section warp beams up to 20
(with pneumatic breaks and automatic tension control), Flanges diameter: 1000
mm, Sizing bath section two roller squeezers, temperature control, Pre
drying section: 2 cylinders, Drying section: 4 + 6 cylinders , Size
boiler : For 700 l+ tank for 1200 l, Width / diameter of warp beam: 2600 mm /
1000 mm, Drive by the AC motor, Computer with LCD color touch screen 15“
control,
NO. 1
Hergeth sample warping machine Vertical type,
model MSL 1800 MT, year
1988, working width 1800 mm,, 10 meters warp length/multiples of 10 meters,
beaming speed 800 meters per min, with beaming device, 10 colors, with creel,
with 4 weft feeders Roj, with Computer programming AITA- display speed , with
Pneumatic valves and end selector, working machine.,
1 Sucker + Mueller Sueding Machine,
Model SF, Year 1989, Working Width 1.8 m, Roller Width 2.0m, 4 Cylinders,
1 HACOBA USK 1000
TSM electronic
sectional warper ww 2200 mm, yoc 1989, max warpbeam disc diameter 1000 mm,
with waxing system, with
1 HACOBA warpcreel G5
, 45 x 8 x 2 = 720 ends, spindles distance 250 mm, tensioners Rostoni.
1 MULLER
"NG42 - 4/54"
needle-weaving machine FOR
TAPES, yoc 2000, for 4 tapes width max 54 mm, with 14 warpbeams.
6 VAN DE WIELE
"VTR 23 - 175" VELVET weaving machines,
face-to-face, yoc 2001, reedspace 1750 mm, electronic dobby VDW - DTR12
dobbytronic for 8 pile frames + 4 ground frames + 4 selvedge frames, warpstop
and pilestop motions, automatic weft finding, 2 ground beams and 2 pile beams,
speed 380 - 400 rpm.
1 set "KANAMARU" SIZING MACHINE FOR SPUN YARN,
YEAR: 1993, MODEL: KJS-9C,
WARPING WIDTH: 90", MAX WORKING WIDTH: 238cm
MAX BEAM FLANGE DIA. : 1,000mm, HEALDSTOCK ROLLER WIDTH: 185cm, NOS. OF
CYLINDERS : 12pcs, DRYING CYLINDER: DIA 800mm x LENGTH 183cm, TYPE OF SIZE
BOX: 2 Size, SIZING BOXES: Box 1 (H)2m X (L)3.5m, Box 2 (H)2m X (L)1.7m , BEAM
STAND: abt. 10pcs, BEAM STAND: CONTROLLED BY "AIR", OPERATING BY PIV ,
1 set "KANAMARU"
Warper,
Y.O.M. : 1993, WARPING WIDTH : 75", CREEL : abt 700 pos., PITCH : abt 240mm,
WARPER BEAM: abt 20pcs/set
1
HACOBA USK 1000 TSM electronic sectional warper
ww 2200 mm, yoc 1989, max
warpbeam disc diameter 1000 mm, with waxing system, with
1 HACOBA warpcreel G5 , 45 x 8 x 2 = 720 ends, spindles
distance 250 mm, tensioners Rostoni.
1 MULLER "NG42
- 4/54"
needle-weaving machine FOR TAPES, yoc 2000, for 4 tapes width max 54 mm, with
14 warpbeams.
1 "BENNINGER"
sectional warper type
Bentronic year 2003 width
3,40 m, with one creel 1000 ends
1 "ZELL" sizing machine year 1980,
composed of : Creel for 12
beams - sizing vat double squeezer, w.width 2 m , 9 drying drums of which 4
are teflonized
headstock width 3,30 m , glue kitchen
1 "SCHLAFHORST" direct warper
type LZD year 1969, width 1,80 m, With 1 "BENNINGER" creel year 1991,
600 bobbins, gauge 300 mm, for beams up to 1000 mm,
Sectional
Warping Machine COMSA
mod. UNI-30 year 1998,
work. width 3600mm, beam diam. 1000mm, semiautomatic crossing device
1 Swivel creel F-GUAIR yoc 1998, 800 positions, gauge 320mm
2 Swivel creels F-GUAIR yoc 1996, 800 posiopns, gauge 320mm
1
SUZUKI SAMPLE WARPER MOD. NAS 10 S ,
YEAR OF CONSTRUCTION 1995, WORKING-WIDTH 2000 mm, WITH
SUZUKI ORIGINAL PROGRAMMER
WITH STANDARD CREEL 10 COLOURS WITH 10 WEFT ACCUMULATORS ROJ QUARTZ, WITH
ROTARY CREEL 8 COLOURS, WITH OILING DEVICE
WITH BEAMING UP TO 220 CMS,
1 SUZUKI Sample Warper Mod. NAS-300hi, working-width 2250 mm,
year of construction 2003,
for warps up to max 600 mt length. Machine equipped as follows : high speed
selector 10 colours, draw-back device on standard creel for yarn loosening
prevention, Standard creel 10 colors equipped with 10 accumulators Roj, Rotary
creel 8 colours with 8 accumulators Roj, Electronic sensors for anti-2 system,
oiling device on bobbin stand
computerized system ORDOMAT,
SIZING MACHINE,
1997, HAEIN, KOREA , CREEL
PART HIC-SV SP960 (1) SP800 (1),
DIRECT WARPER TAKE-UP 1,000 (DIA) x 1,800MM (L), SPEED MAX 600M/MIN. BEAM
LIFTING DEVICE, HYDRAULIC BRAKE
SIZING PART
BEAM STAND - 12 x 16 STAND, SECTION BEAM STAND, 2 SIZING BOX, 15 CYLINDERS (TEFRON
COATED)
|
