1 MONTI calander
for knitted
fabriques, 1, 40 ww, type 203, 1988
1 BABCOCK
ECON-AIR stenter, yoc 1998,
ww 1800 mm, horizontal pinchain, 9 bays, gasheating, entry length 5m., with
TANDEMATIC uncurlers, - entrance : BIANCO de-twisting/expanding/centralising
device BABCOCK padder mod. 5809 MAHLO RFMC electronic weftstraightener with 4
heads MAHLO residual humidity control - delivery : 2 cooling cylinders J-BOX
plaiter + batching motion.
KÜSTERS Dye
padder,
Type: 222.11.1800, Yoc 1978, Roller width: 2.000 mm, Max. Working width
1.800 mm, Machine overhouled in YOC 2000, Entry with BASTIAN unwinding System,
Corino -Fabric centering unit, Dye Padder, Exit with Cooling Roller, Winding
System Bastian
1
BIANCALANI AIRO 1000 tumbler/softening machine,
yoc 1994, 2 ropes, steam + gasheating, with dust-exhaustor + dust-collector.
1 x
BRUECKNER STENTER, 1996,
Type HN 22/4, Working
width 2200 mm, 4 chambers, cooling zone, steam heated, clip chain, mechanical
weft straightener, Krantz Padder (approx. 1970), exit plaiter , or A-Frame
DRYER FOR
TUBULAR KNIT FABRICS,
1 SANTEX tensionless
relaxing/shrinking dryer - SANTASHRINK SUPER JUMBO type - roll.width
mm.1450, n.03 sections
n.03 passages , with overfeeding adjustable up to 50% up with relevant free
shrinkage effect , steam heated with infra-red temperature control, extremely
uniform temperature distribution in the chambers by effective placing of the
air-nozzles, Conveyor carpet made in KEVLAR and supporting treatment due to
steam injection and mechanical vibration during the process , D.C.drive for
the carpet speed and fan speed adjustable by Frequency Inverters
device., Machine provided of n.02 KEVLAR conveyor carpet as spare, 1
Electronic panel board with microprocessor SANTAMATIC 2000 for automatic
control and guiding during the finishing operation and control of the
operational data for highest repeatability, Production capacity : 250 kg /
hour of evaporated water per each chamber ( per n. 03 chambers : total
evaporated water 750 kg / hour ), Machine is new – never been put in
operation
No.1 Biella
Schrunk Process
Continuous Fabric Decatizer, year 1999, w.w. 2200 mm., Biella
Shrunk Thermo Duplex Continuous Decatur mod. 90, steam heated cylinder,
control panel, conveyor belt and flat folder.
No.1 Biella Schrunk process Full Decatising Range,
w.w. 2200 mm., Fabric entry, (3) steam heated cylinders, control panel,
operators platform, stainless steel pressurized steam chamber, fabric exit
flat folder.
No.1
Biella Schrunk Process Full
Decatising
Range mod. Suprema 90, year 1994, w.w. 2200 mm., Biella Full Decatur Range
with fabric entry, (3) steam heated cylinders, control panel, operators
platform, pressurized steam chamber, conveyor belt and flat folder.
1 Stäubli
Drawing-In Machine,
built 1986, type Delta
100. Consisting of: 28 shafts, speed 160 threads/min, 1-beam, heddles for 13"
and 15", optical dropper- and heddle control, dropper bars 3, 4, 5 und 6,
dropper height: 125-165 mm length, Barco intersection, PC-control, CC-control,
2 vehicles for tools, several spare parts.
Working width: max. 220 cm. In excellent condition.
1 x Krantz
Padder,
Width: 2200mm YOC: 1972 EL: 380/3/50, 2-cylinder padder with trough.
Cylinder dia 380 mm. Excellent condition
\1 x Krantz
Stenter,
Width: 2400mm YOC: 1973 EL: 380/3/50, 4 chambers, originally hot-oil
heated but upgraded to propane/natural gas in 1998 by Krantz. 4 Maxon Valupak
300 burners - each 290 kW, inlet with E&L AWF1 guiders and Mahlo FMC 62 + 64N
weftstraightener with 2 eyes, E&L LAM6/53 fingercurlers, pinchain, max 180-190
deg. C., max speed 30 m/min, exit in plaiting with edge-cutting and glueing as
well as integrated inspection board. Fabrics run from 160 - 400 gsm. Has been
running only 8000 hrs since the change in 1998.
1 x Krantz
Stenter,
Width: 2200mm YOC: 1972 EL: 380/3/50, 4 chambers, originally hot-oil
heated but upgraded to propane/natural gas in 1998 by Krantz. 4 Maxon Valupak
300 burners - each 290 kW, with Krantz 2-cylinder padder - cylinder dia 380 mm
- at entry, pinchain, exit in plaiting. Max 180-190 deg. C., max speed 30
m/min, exit in plaiting. Fabrics run from 160 - 400 gsm. Has been running only
17000 hrs since the change in 1998.
1 x
Vollenweider Shearing/Sueding Machine,
Type: TSD-1T/F Width:
2200mm YOC: 1982 EL: 380/3/50, Shearing machine. 20 blades on cylinder,
speed: max 20 m/min, exit in plaiting, with metal detector.
1 x
Vollenweider Shearing/Sueding Machine,
Type: TSF-1T Width:
2400mm YOC: 1996 EL: 380/3/50, Shearing machine with one shearing cylinder
- 24 blades.
1
x Weiss Knit Calender,
Type: PTM / DK Width:
1100mm YOC: 1962 EL: 380/3/50, For rope
1
x Julien Singeing Machine,
Type: Carbomatic STD YOC:
1976 EL: 380/3/50, Two burners for singeing on both sides of cloth
simultaneously, ww: 2000 mm, 1 cooling cylinder, inlet and exit in plaiting,
speed 90 m/min
1 x Mahlo
Cloth Guider,
Type: RFMC-74N Width: 2000mm YOC: 1982 EL: 380/3/50, with 4 eyes
including all electrical boxes and controls. In very good condition.
1 x Artos Thermal
Oil Boiler,
YOC: 1976 EL: 380/3/50,
Two main channels (high and low), temperature of outgoing hot-oil 270-300 deg
C, 550 kW, capacity 730 liters
1
CARU Peach - Suading - Emerizing machine,
Year 1992 , 1,8 meters
working width , 3 suading rollers (2 rotating and 1 reciprocating), Perfect
condition stopped, still erected
2 MACHINES
LAMPERTI (GROUP) - GBM ; 36 RAISING ROLLERS ; WIDTH 3,20CM ; BOSH MOTOR ; YEAR
1992
2 MACHINES LAMPERTI (GROUP) - GBM ; 36 RAISING ROLLERS ; WIDTH
3,20CM ; ELECTRONIC INVERTER ; YEAR 1995
1 MONFORTS teflon glas net relaxation dryer MONTEX,
for relax drying of woven-
knitted- and tubular knitted fabric, type DYNAIR 5000, year 2003, nominal
width 220 cm , working width (fabric) 200 cm, mechanical speed 5 - 100 m/min
1 BRÜCKNER continue
wide-width Drum-Washing machine, type SCOUT TR 6/V2,
for knitted and woven
fabric; pre-washing of raw material, post-washing of KKV bleached
fabric, post-washing of KKV dyed fabric, year 1999, working width 2400 mm
1 BABCOCK
wide-width washing unit, type P77020-002,
for desizing (recovering
of synthetical sizing liquor and rinsing of the remaining size), installed in
yr. 1996;
working width max. 1800 mm; cylinder dryer; 16 drums; roller width 2000 mm;
speed of cloth passage 15 - 150 m/min; product speed abt. 100 m/min at an
average weight of 115 g/m2
1 MONFORTS
stenter frame 6 chambers;
for woven and knitted
fabric; model 12 G/K-V, year 1989; 6 drying chambers; vertical pin chain with
de-needling stop; gas-heated; roller width 260 cm; working width 240 cm
1 FAMATEX
stenter frame of 8 chambers;
for heavy woven and
knitted fabrics; with heavy reinforced chain; WE-TEX 2-roll padder; roller
width 240 cm; working width 220 cm; yr. 1992 / 73
1 MONFOTRS
rubber belt shrinking machine,
used for shrinking knitted
and woven fabric, Type TOP-TEX, yr. 1989, roller width 2600 mm, max. working
width 2400 mm, min. working width 1000 mm
1 KÜSTERS
dye padder,
type 222.11.2000, year
1999, roller width 2200 mm, working width 2000 mm, including dosing plant
2 -Head-Coating line complete with lacquering
and colour kitchen,
consisting of: Unwinder, Entrance with 2 heated Cylinder , Cylinder Coating
head (WEISS), 3 Chamber Stenter frame with horizontal Clip-Chain, IR Zone,
Embossing Calander (horizontal), 2 Cooling cylinders, Roller Compensator,
Rubber-belt & Cylinder Coating head, 5 Chamber Stenter frame with horizontal
Clip-Chain, IR Zone, Embossing Calander (horizontal), 2 Cooling cylinders,
Selvedge Cutting device, Axial Winder
Themo oil heating incl. Thermic Air Cleaning Device,
1 Head Lacquering line with: Entrance with Unwinder, Lacquering device, 2
Chamber Dryer, 2 Cooling Rolls, Axial Winder,
1 Paste Preparation Kitchen with: 3 Roll Colour mill, 1 Vacuum Disolver RSV
24( DRAIS / 1973), 1 Scail, 1 Stir
Transport devices, make: BABCOCK, working width: 2400 mm, roller width: 2600
mm, y.o.c.: 1987
1 STENTER FRAME MAKE
KRANTZ type K10, yoc 1988,
2000 mm roller width,
vertical pin chain, machine suitable for woven and knitted fabrics, lastely
running on woven fabrics, high cloth feeding, compensator, rotating expanding
roller system with centering device at the entrance, 2 roll application pad
mangle with dipping vat, MAHLO weft/bow straightener type RFMC 74n with 4
optical heads, 8 bay stenter,entry approx 3,5 mtr., with opto electronic width
control and adjustment, steaming station, gasheating, cooling zone, edge
cutter and glueing device, with control delivery onto plaiter and batcher,
machine equipped with working bridge for temperature control, visual process
control, machine still on floor in excellent condition
1 STENTER
MACHINE MAKE BRÜCKNER YEAR 1992,
roller width 2000 mm
suitable for woven and knitted fabrics with horizontal combined pin and clip
chain comprising of 6 compartments, gas and steam heated (3 and 9 bar), clips
and pin chain, long inlet zone, 5 m, dryer 18 m, outlet zone 3,5 m, selvedge
glueing & cutting system, plaiter and big batching system, max. batches Æ 2000
mm, KUEPPERSBUSCH burners, BRUECKNER Padder, MAHLO weft straightener 4 heads -
Type RFMC 94 H BRÜCKNER automatic fixation device BFM/C-M cooling zone, MAHLO
humidity control system RMSR-7s with three heads, bypass at the vans, so if
machine stops, air will not be blown on the fabric Filters can be cleaned
during production because of the double filter system, energy consumption 860
Kcal per KG evaporated water, electrical power installed 90 kW
1 calander
machine make
Ramisch-Kleinewefers type
RKK 380, 1992, 3 rollers, 80 tons hydraulic pressure, roller width 2000 mm,
feeding frame metal detector, 3 finger edge uncurlers with cloth guider
Erhardt & Leimer type KF 10, roller configuration STEEL electro hot water
heating dia 500 mm, COTTON 500 mm, RACOLAN 480 mm, delivery onto batcher
1 PLANT for
BLEACHING, DYEING and FINISHING of the TERRY-CLOTH, composed of:
1 Observatory with
folding device and balance, yoc 1980
1 BRAZZOLI Overflow, type MBC RUL 4, yoc 1980, capacity 400 kg.
1 BRAZZOLI Overflow, type 572 RUL 4, yoc 1985, capacity 400 kg.
1 BRAZZOLI Overflow, type 234 RUL 4, yoc 1981, capacity 400 kg.
1 MASTER centrifuging machine, type 266, yoc 1977, complete of loader, can
dia.1500 mm.
1 MASTER centrifuging machine, type 313, yoc 1979, complete of loader, can
dia.1500 mm.
1 BIANCO rope-opener, type MO2131 013625, yoc 2002
1 MUZZI GESSNER 1975 Stenter frame, type 78, max. width 3200 mm., 4
compartments, steam heating
1 CABER padder, yoc 1976, 3 cylinders.
1 MAHLO weft-straightener, type ORTHOMAT RFMC 10A/3400, yoc 2002
1 BIANCO centering machine, yoc 2002.
1 Rolling machine, yoc 1990, with 5 AMAT cutters
1 Jigger,
OTTO FUNKE, Piccolo, 180
cm working width, beam dia 1050 mm, with Micro-Computer PC 3000 SEDO, made in
1987/88, mcs-no.: 88-207/87-206
1 Sample Jigger,
BENZ, type LJ500,
150 cm wide
1 Jig
MCS, made
in 1991, roller width 280 cm, for 600 kg yarded fabric
1 Jig
KÜSTERS,
type 268.17, made in 1989, 280 cm wide
1 Jigger
VALD HENDRICKSEN,
Type 1000, 200 cm working width, made in 1990, control MICROTEX PRO4
1 Dyeing
Jigger KÜSTERS,
made in 1985, working width 180 cm, dia 100 cm, with feed trough,
2 Jumbo
Jiggers KÜSTERS,
Twin-Jig 268.35, roller width 200 cm, 125 cm winding dia, YOC 2000, speed
5-150 m/min., capacity ca. 5000 m (polyester/viscose) and 3000 m (cotton)
1 HT-Jigger MCS,
type Comby-Jigger JP70, YOC 1982, 180 cm roller width, control BARCO
1 Stenter
AIR INDUSTRIE,
Type compact air, made in 1982/88, 300cm working width, with Foulard, needle
chain, 6 bays, gas heated, 3 weft straighteners in different widths, Foulard
with 2 chassis, PERMASET control system, needle chain, finishing inserts made
of stainless-steel, approx. 1000 litres with mixer and pump steaming bay in
inlet, cooling bay in outlet, cutting device, bit batcher, CO² distinguishing
system The stenter was changed from 3 to 6 bays in 1988, gas heated, unit is
complete incl. The needed electronic controls, accelerators and installations
1 Stenter
BRÜCKNER VN,
made in 1980, 6 bays, 180cm WW, vertical pin chain, with: foulard KÜSTERS
222-52-1800, made in 1986, weft straightener MAHLO RFMC-94H11, made in
1994, tower washer MENZEL, made in 1982, including roller vat and intermediate
squeezer, steam chest, outlet for batching with peripherical winding.
1 Stenter BRÜCKNER,
made in 1981, 2 bays, gas heated, pin-chain, for a width of 200 - 520 cm,
cooling zone
1 Straightening Stenter,
TEXTIMA, type 6595, 240 cm
working width, YOC 1986
1 Tier-Stenter,
KRANTZ,
YOC 1989, with needle chain (interlock), 6 floors, 4 bays, 180 cm working
width, MAHLO weft straightener YOC 1998 type RFMC-10 P, with 2 KLEINEWEFERS
foulards with Bicoflex rollers for wet in wet and for finishing, brushing unit
and suction, outlet with big batching device and plaiter, machine is gas
heated
1 Stenter
BRÜCKNER,
type Twin-Flow, 220 cm wide, 8 bays, gas heated, y.o.c.2000, with horizontal
needle chain, upper and under airflow can be separately controlled in
temperature and speed, the machine consists of: inlet with slide, brushing
unit, ERHARDT & LEIMER middle cloth guide, air blade or kissing roll, outlet
with cooling zone, cloth storage and plaiter,
1 Stenter
STENTEX/MOENUS,
type Stentotherm 3300, YOC 1996, working with up to 180 cm, 9 bays, gas
1 Stenter
BABCOCK,
YOC 1993, 5 chambers, gas fired, drying and heat-treatment stenter with
horizontal pin and clip chains for woven fabrics, Fabric width max. 260 cm,
speed max. 80 m/min., scray accumulator entry, BIANCO fabric guiding, HUNT &
MOSCROP vertical pad mangle, swim roller, width 280 cm system KÜSTERS, YOC
1960, Optitexma AB, Optivac vacuum extraction, 7 MATHER & Platt Steam
cylinders vertical, BIANCO automatic weft straightener DIGITEX with optical
reading system for woven and knitted fabrics 280 cm wide Year 1993, roller
accumulator (fabric capacity 60 m), descending batch winder and plaiter
The machine was used to dry cotton/polycotton, pigment pad, finish furnishing
and bedding fabrics.
1 Stenter
BABCOCK,
180 cm wide, 5 bays, YOC 1988, needle chain, gas heated, MAHLO weft
straightener, BABKOCK Foulard
1 Stenter for
drying and thermofixing
BRUCKNER/SABEN, YOC 1992, 240 cm wide, vertical pin chain,
automatic over-feed, MAHLO Permaset, 8 chambers, oil heated, selvedge cutters,
cooling unit, TEPA vacuum extractor, TEPA Foulard, 240 cm wide, BIANCO weft
straightener, outlet with big batcher and plaiter,
1 Stenter
MONTEX, YOC 2002, 5
chambers, pin type, 320 cm working width
1 Stenter for
Woven and Knitted Fabrics
BRUCKNER, 3,40 m wide, 4 bays, oil heating, pin/clip chain, 2
foulards KÜSTERS, 1 x 1,80 m wide type 225.25, 1 x 3,40 m wide type 222.53,
made in 1976 and 1975. The stenter has an entry zone of 5,50 m, with steaming
device, gluing device, cutting device, cooling zone, plaiter.
1 Stenter for Woven and
Knitted Fabrics
ARTOS, 310cmwide, 6 bays,
thermo oil heating, pin/clip chain, entry zone 5,50 m, outlet with plaiter and
winder, foulard ARTOS 5805, made in 1973, 2 rollers, sloping position, manual
weft straightener, selvedge gluing, selvedge cutting, centre cutting.
1 4-Bay
Duplex Stentering And Dyeing Frame ARTOS,
made in 1986, steam-heated, ARTOS-MAHLO weft straightener, cloth width up to
1600 mm, optic one needle control E&L, big batcher, plaiter, pin chain, inlet
frame with pneumataic ERHARDT & LEIMER spreaders type KF 2020, outlet with
plaiter and batch winder
Two-nap
Coating Unit 1,
Manufacturer: JWS, Mohr, ISOTEX, Y.O.M.: 1970, Consisting of: Paper-unwinding
with selvedge control, Roller cloth storage, IWS – spreader, Mohr – passage
dryer, 9m long, Cooling roller unit with two cooling rollers, Winding-up
station, Pedestal with cloth passage, Pendulum roller to be installed to a
hydraulic winder, ISOTEX – spreading head, Mahlo G.S.M.substance measuring
unit FMI 10 on fork can be moved manually, Double let-off unit with driven
let-off belt, Cloth guide via turning frame, Laminating unit, ISOTEX passage
dryer, 12m long Cooling roller unit with 2 cooling rollers, Pedestal with
cloth passage, Selvedge guide via turning frame, Separation point with cutting
device, Friction calander, Fabric winding-up as turning winder with two
winding stations, Paper winding-up, Lifting devices,
The plant is Ex-design (= flameproof) and suitable to work with dissolvent.
Two-nap
Coating Unit 2Manufacturer: ISOTEX,
Mohr, Y.O.M.: 1972, consisting of:, Paper-unwinding with selvedge control,
Roller cloth storage, ISOTEX – spreader
ISOTEX – passage dryer, 11m long, thermic oil heating, Cooling roller unit
with two cooling rollers, dia. 600mm, Winding-up station, Pedestal with cloth
passage
Hydraulic
unwinding unit controlled via pendulum roller, Selvedge control as swivelling
– sliding roller, Laminating cylinder as winding frame with selvedge control,
ISOTEX
– spreading head, Mahlo G.S.M.substance measuring unit FMI 9 on fork that can
be moved manually, Double let-off unit with driven let-off belt, Cloth guide
via turning frame, Laminating unit, Mohr passage dryer as stenter, 12m long,
with air circulator and exhaust ventilator, thermic oil heating, Hydraulically
operated friction calander with additional unwinding station, Cooling roller
unit with 3 rollers, dia. 600mm, Selvedge guide as swivelling – sliding
roller, Separation point with cutting device
Fabric
winding-up as turning winder with two winding stations, Paper winding-up,
Lifting devices, Mobile ascending batch winder
The
plant is Ex-design (= flameproof) and suitable to work with dissolvent
Two-nap
Coating Unit 3Manufacturer:
Caratsch, Maier, Y.O.M.: 1992, Working width: 900 – 2000 mm, Roller width:
2200 mm, Speed: 2,5 – 50 m/min. Structural components 1st Spreading unit
Hydraulic unwind for paper and other lengths of fabric materials, Selvedge
control for paper-unwinding as winding-frame guide, Second selvedge control as
swivelling – sliding roller, Caratsch universal spreading machine, steel
roller, air doctor blade, rubber roller, electric positioning for doctoring
device, Mahlo G.S.M.substance measuring unit, Caratsch passage dryer as
stenter with pin chain, ca. 22 m long, four zones with ca. 5 m each, thermic
oil heating as infrared dryer, aircirculating system (upper and lower air),
fresh-air feed with heating system, exhaust unit, Group of pumps with
independent control circuit for each zone, Cooling roller unit with two
cooling rollers, dia. 600mm, Hydraulic winder as Sochor-winder, Pedestal with
cloth passage, Hydraulic unwind with second winding station via pendulum
roller, Selvedge control as swivelling – sliding roller, Cloth guide via
turning frame, Caratsch universal spreading machine, steel roller, air doctor
blade, rubber roller, electric positioning for doctoring unit, Stentering
field with clip chain as feed into the laminating unit, Laminating unit, Mahlo
G.S.M.substance measuring unit, Caratsch passage dryer as stenter with pin
chain, ca. 22m long, four zones of ca. 5m each, thermic oil heating as
infrared dryer, air-circulatingsystem, Group of pumps with independent control
circuits for each zone, Unit of cooling rollers with two cooling rollers, dia.
600mm, Unit of cooling rollers with three rollers, dia. 600mm, Separating
point with selvedge cutting unit, Hydraulic winder for paper-winding,
Ascending batch winder for winding-on of tissue-film, Selvedge control as
swivelling – sliding roller, Tissue winding-on as hydraulically-driven Sochor-winder
with centric support, Lifting devices, Direct-current drive (EW Hof), SPS –
control (Siemens), storage of recipes and production data, Machines placed in
two tiers for saving space, The plant is Ex-design (= flameproof) and suitable
to work with dissolvent
Babcock
stenter,
ww 320 cm, type 5000, yoc 1985,
Type 5311 1800, order 163128, horizontal combined chain, pin and clips max
Working width 320cm. High entance with E&L1 pc. Padder, Mahlo weftstraightener
type RMFC long entrance field, pinning with overfeed 8 bay frame, gasheated
cooling unit, moisture measurement, exit with batching motion, plaiting and
A-frame winding. 2 pcs.Econair energy saving.
Brugman
washing,
scouring machine, yov 1985,
working width 320 cm, Entrance E&L roller width 3400mm, 3 washing compartments
with high pressure squeeze, 1 impregnation compartment with dosing combined
steamer, 245mtr. on rollers and long conveyor belt 5 washing compartments with
high pressure squeeze batch winder, heat exchanger, separate impregnation unit
with dosing and batcher ww.3200mm, renewed electrics
Hemmer
milling/washing machine,
type Lavarapid SFW01, yoc 1987, 10 ropes
Santex drum
washing machine type Actiwash, yoc 1993,
working width 1800 mm, for knitted and woven 2 Compartments with 2 drums under
water steamer with stainless steel belts content 500-600mtrr. 3 Compartments
with 2 drums each compartment with dirt collector end squeeze, batcher and
plaiter, warm water exchanger, dosing etc.
2 Vald
Henrikson jiggers, type VH 1000 super,
roller width 2200, ww 1900 mm, Atmosferic, yoc 1983/1984, but completely
revised and upgraded in 2000, with Mircrotex Pro 4 control, anti occilation
device, Dosing system and full owner manual. Pneumatic doors. Max speed:
minimum 10 meter/minute, max. 60 meter/minute. Fabric tension: 0-100 kg,
stepless adjustable. Max fabric load: 3.500 kg. If you want to do dyeing: 900
liter dye fluid maximum. Electricity: 8 kw. Steam consumption: 310 kg/hour
max. Incl. 1 set of spare drives (gear box) if you take both. Serials of the
Vald Henrikson jiggers: 101448 and 101394.
Küster
Calander, ww 1800 mm, yoc 1965,
but completely overhauled and modernised. 2 bowl calander, Steel-Racolan, ww
1800 mm, Direct gas heated (new burner, with electronic temperature control,
Metal detector, A frame winding, Centre winding device.
STEAMER
MACHINE
EX BABCOCK
’93 , R/W 380CM
1 continuous
tumble dryer ANGLADA TURBANG,
type TDR 2,4 S-K year 1998, 240 cm working width, gas heating, ABIG burner
2
closed/covered dyeing jigger made VALD HENRIKSEN,
type VH SUPER year 1980, face roller width 240 cm, working width 220 cm
machines were working with 100 % cotton, some poliester machines were used for
dyeing and desizing weigth of loaded fabric about 300 to maximal 400 Kg
depending on type of article capacity is 1000 meters of fabric up to maximal
220 working width
1 drum dryer
made MONFORTS, type TZ/S24
year 1979,
with 2 drying groups each 12 drums = total 24 drums, steam heated, face roller
width 185 cm, drum Ø 60 cm, high entry, big roll exit,
1 friction
calender made KLEINEWEFERS, type K 30/5
face bowl
width 240 cm , 5 bowls , from top to bottom: cotton diameter 450 mm, steel
diameter 250 mm, paper diameter 450 mm, steel diameter 250 mm, paper diameter
450 mm , 1 spare paper bowl diameter 500 mm , PIV driven , hydraulic pressure
, steam heated
1 TMT coating
and laminating range,
working width
200 cm, pin chain dryer composed of: unwinding frame, fabric accumulator
capacity for 42 m, TMT coating head, TMT laminating unit drying unit with
vertical pin chain, 2 fields, thermal oil heated, IR preheating unit, heavy
vertical calander unit cooling unit with 3 cylinders, diameter 56 cm, winding
frame with selvedge control
1 X KUSTER
COLD PAD BATCH DYEING MACHINE,
YEAR 1990,
WORKING WIDHT 3200 MM, KUSTER DYEING PADDER TYPE 222-17-3200, E&L CLOTH
GUIDERS, ENTRY WITH TENSION AND UNROLLING DEVICE, , 2 BOWL DYEING PADDER WITH
DYE BECK, EXIT ONTO BATCHER, INVERTER DRIVE ELECTRIC CONTROL PANEL, DOSING
PUMP, 3 X S.S. MIXING AND FEEDING TANKS, RELATED PIPES AND FITTINGS
CUTTING AND
HEMMING SECTION:
1 inspection table, working width 200 cm.
1 SCHMALE DURATE machine type 510, yoc. 1999, for fabrics of 81 - 330 cm
1 SCHMALE DURATE cutting machine type C-111, yoc. 1998, working width 120 cm
1 SCHMALE DURATE machine type 640, yoc. 1985, for fabrics of 25 - 180 cm
1 embroidery machine type KSM, yoc. 1991, with 10 heads, 8 colours
1 MAUSER - Spezial overlock machine, type KL 9732-432 FA2
2 safety sewing machines,
4 sewing machines of 2 needles
SANTA LUCIA
Tenterframe, year 2001,
210cm wide, 8 chambers, gas, but pin-chain only.
1 Embossing
calender Ramisch Kleinewefers,
type RKK
360P-Nipco, 1989, 3 cylinders, cylinder width 3.000 mm, pressure 60 tons, top
cylinders paper, diam. 640 mm, embossing cylinder diam. 250 mm, bottom Nipco
cylinder diam. 500 mm, incl. 10 cylinders.
1 Roll to
Batching device for Gray cloth ,
Specificatoins: 1] Inlet for Rolls 500 meter, 2] Sewing machine at Inlet., 3]
Scray or Conveyor., 4] Non stop Batching at A-Frame, 3000 - 4000 meter fabric.
5] Working width 1850 - 2000 mm
Finishing
Department for terry towels fabrics
1. dyeing apparatus for yarns : Scholl (1989 year)with capacity till 500 kg –
2 apparatus (each ma chine have capcity 500 kg) plus drying machine Scholl
1988 year
2. dyeing machines for fabrics :
Scholl – 2 pcs year 1987
Dofama on Scholl license – 2 pcs 1989 year , BC10 /2 ( with two tanks x
150 kg each) and BC10/3 (with 3 tanks each of 150 kg)
1 Dofama on Scholl license , 1985 year – 1 tank with 2 passages ( 1
passage for 150 kg) Brazzoli (6 tanks and each tank for 150 kg) – 1989 year ,
capacity 900 kg
Jiggers 160 and 200 cm – DOFAMA, year 2003 BEKA5 (very good condition)
3. shearing Textima machines – 8 pcs
4. drying machines (5 and 7 drying sections) 1987 Textima
5. folding-measuring machines – 3 machines
6. inspection machines – 6 machines
7. folding machines – 2 machines
8. sanforizing machines – japan , 1,60 m Nikki Mach.
Sewing and another finishing and confection machines
JUKI,overlock – 45 machines, complete
Menschner – line for cutting and bordering the towels.
Laboratory equipment
Apparatus for yarns and fabrics testing
BABCOCK /
HAAS Dryer,
Tumble drier,
cont. type with belt, 6 Sections thermo oil heated, complete reconditioned
1998, roller width: 2600 mm
1991, 240 cm
1 line for
processing artificial leather TURGANG,
year 2002, composed of: TURBANG MULTI-STRIKE model TMS-DUPLEX drying and
finishing machine
One accumulator device, One impregnation pad machine, One output winder
device, One sewing machine
1 MARTINDALE - with all apparate, year 2002
1 QUV PANEL – with lamps, year 2002
1 BLUE SCALE, year 2002
1 DYNAMOMETER – with all apparate, year 2002
1 washing machine, year 2002
1 CROCKMETER – with grey scale, year 2002
1 CLIMATEST, year 2002
1 BALLY, year 2002
1 automatic calendar, year 2002
1 viscosymeter BROOKFIELD digital, year 2002
1 punch cutter, year 2002
2 laboratory coating and laminating unit TEAM COAT, mod. JOLLY PILOT with
intergrated coating head, year 2002
1 paper inspecting plant ROLLMAC for the paper control operations, year 2002,
w.w. 160cms, precision rewinding, tensioning and compacting paper roll,
working with single operator, changing reels without discharging the machine
Krantz
stenter, mod. KD-10, 1989,
rebuild in 2004, w.w. 220 cm, (face 2400 mm), vertical pin chain, 5 Chambers
with hot oil heating, included vertical oil boiler Nva Sigma, 1.6 mill. Kcal.
Range with: Overhead entry, Corino FLC-3 opening/centering unit – Ciatti
Foulard, rubber/rubber, double dip pan - Mahlo Weft straightener RFMC 94H,
’89, 4 cells (2 bow + 3 skew) - Lomg entry, E&L nailing FR-1501, Overfeeding
wheels + Over-feeding cylinder system (total up to 60%) – Mahlo Gravimat and
Orthomat – Edge gummers and cutters – steambox – central fabric support line –
5 Chamber low profile housing, hot oil heated – Sandwich cooler at exit –
Delivery with Folder & A-frame winder and non-stop inspection frame with
surface precision winder.
Unitech (Sta
Lucia) stenter, mod. 9S.2400 gas, 2003,
w.w. 240 cm, 9 chambers gas heated, vertical pin chain, with. Overhead entry,
Corino 3 roll foulard with double dip pan – Corino weft straightener MK-2, 2
skew + 2 bow correctors, 4 cells – Long entry with E&L nailing FR-5502, steam
box, support line, edge gummers and cutters – Mahlo Orthomat and Gravimat –
vertical pin chain – low profile housing – Sandwich cooler – Delivery with
A-frame winder and folder. Inverter drives.
1 MONTI
calander for knitted fabriques,
1, 40 ww, type 203, 1988
1 BABCOCK
ECON-AIR stenter, yoc 1998,
ww 1800 mm, horizontal pinchain, 9 bays, gasheating, entry length 5m., with
TANDEMATIC uncurlers, - entrance : BIANCO de-twisting/expanding/centralising
device BABCOCK padder mod. 5809 MAHLO RFMC electronic weftstraightener with 4
heads MAHLO residual humidity control - delivery : 2 cooling cylinders J-BOX
plaiter + batching motion.
1 Sucker
Muller emerising/sanding/peaching machine, model SF-4C, yoc 2000,
w.w. 2400 mm, 4 emerising cylinders, hydraulic de-batching and batching
motions BASTIAN, with brushing device and dust-exhaustor.
1 emerizing /
sueding peach finish machine made SUCKER + MULLER, type SF,
year of
construction 1990, roller width 2.100 mm, 4 emerizing rollers with individual
drive motors, each emerizing roller with individual emerizing level
adjustment, with tension adjustment entry / exit, with exhaustion unit,
machine delivered with hydraulic big roller unwinder made BASTIAN type 02001,
roller width 2.000 mm, with 4 + 4 roller unwinding speed adjustement balance
1 MONFORTS
STENTER FRAME TYPE 12 G/K-V
FOR WOVEN AND KNITTED FABRIC, YEAR OF CONSTRUCTION 1989, ROLLER WIDTH 2600 MM,
WORKING WIDTH 2400 MM, Consisting of : MONTEX 2-BOWL PADDER TYPE 2/H, ROLLER
WIDTH 2600 MM, WORKING WIDTH 2400 MM, YEAR OF CONSTRUCTION 1989, MAHLO
ORTHOMAT WEFTSTRAIGHTENER, TYPE FMC-96 H – YEAR 1989, FEEDING SECTION, INLET
FIELD LENGTH 5 M, VERTICAL PIN CHAIN WITH DE-PINNING STOP, 6 DRYING CHAMBERS,
GASHEATED
PLEVA HUMIDITY CONTROL
1 MEZZERA
JIGGER TYPE VGL,
ROLLER WIDTH
2600 MM – WORKING WIDTH 2400 MM, BATCH DIA MAX 600 MM, SUITABLE FOR MEDIUM AND
HEAVY FABRICS, HEATED CAPE (DROP-PROOF), DIRECT AND INDIRECT STEAM HEATING
SYSTEM, TRAVERSING ROLLER DEVICE, WASHING INSIDE THE TANK THROUGH NOZZLES,
HYDRAULIC BRAKING SYSTEM WITH OILDYNAMIC CENTRAL UNIT, YEAR OF CONSTRUCTION
1978
1 MEZZERA
JIGGER TYPE VGL – ROLLER WIDTH 1800 MM,
WORKING WIDTH
1650 MM, MAX BATCH DIA 400 MM (CAPACITY APPROX 150 M), SUITABLE FOR MEDIUM AND
LIGHT FABRICS, HEATGED CAPE (DROP-PROOF), DIRECT AND INDIRECT STEAM HEATING
SYSTEM WITH THERMOREGULATION, TRAVERSING ROLLER DEVICE, WASHING INSIDE THE
TANK THROUGH NOZZLES, HYDRAULIC BRAKING SYSTEM WITH OILDYNAMIC CENTRAL UNIT,
ELECTRIC PANEL BOARD WITH FREQUENCY INVERTERS DRIVE WITH SPEED ADJUSTER,
MACHINE TOTALLY RECODNITIONED WITH : NEW ELECTRIC PANEL BOARD WITH FREQUENCY
INVERTER DRIVE, NEW HYDRAULIC BRAKING SYSTEM
1 M.C.S.
JIGGER MODEL MID-JIGGER – YEAR OF CONSTRUCTION 1999,
ROLLER WIDTH
1800 MM (WORKING WIDTH 1650 MM), BATCH DIA MAX 1100 MM
MAX
TROUGH CAPACITY 1200 LIT, HYDRAULICELECTRONIC DRIVE, MAX TEMPERATURE 143 d C,
COOLING WITH HIGH EFFICIENCY EXTERNAL HEAT , XCHANGER, SPEED RANGE 15 to 150
M/MIN, CONSTANT TENSION ON FABRIC FROM 10 to 60 KGS, LOW LIQUOR RATIO APPROX 1
: 2, PUMP FOR BATH RECYCLING UNIT WITH FILTERING UNIT, DRIVEN UNIT FOR
CENTERING SELVEDGES, UNLOADING DEVICE FOR BIG ROLL, AUTOMATIC MOVE-DEVICE TO
AVOID UNBALANCES ROLL AT THE END OF DYE-CYCLE, HIGH EFFICIENCY WASHING DEVICE
WITH WATER SPRAYING, MICROPROCESSOR TERMOELETTRONICA CT 400 FOR TOTAL
AUTOMATION OF THE, DYE PROCESS
1 KÜSTERS
JIGGER TYPE CYCLOTRIC 1000,
ROLLER WIDTH
2000 MM – WORKING WIDTH 1800 MM, BATCH DIA 1000 MM, TENSION ADJUSTABLE ON THE
CLOTH FROM 0 to 60 KG, SPEED ADJUSTABLE FROM 8 to 120 M/MIN, STEAMHEATED WITH
DIRECT AND INDIRECT COILS, SELVEDGE DEAXIAL DEVICE
PENDULUM DEVICE AT THE END OF DYE-CYCLE, WITH PUMP FOR BATH RECYCLE CONNECTED
TO AN EXTERNAL, STAINLESS STEEL TANK FOR COLOUR ADDING, WITH WASHING SYSTEM
INSIDE THE TANK THROUGH NOZZLES, TOTALLY RECONDITIONED
1 Menzel
Continuous Open Width Bleaching Range,
Year 1989/90,
Working Width 1.8m, Roller Width 2.0 m, Fabric Entry, J-Scray max. 300 m, E&L
Selvedge Guiders KF10L, Dipping Bath with Squeezing Unit, 6 tons pressure,
Washing Compartment, Content 30 m, Direct Heating, Squeezing Unit , 6tons
pressure, Washing Compartment, Content 30 m, Direct Heating, Roberto High
Pressure Squeezing Unit , 10 tons pressure, OPTIMAX Application Unit (1995/6),
Combination Steam, Content 100 m, with E&L Guiders KF10L, Dipping Unit with
Squeezers, 3 Washing Compartments, Content 30 m, Direct Heating, Squeezing
Unit , 6tons pressure, Washing Compartment with Acid Adding, Content 30 m,
Direct Heating, Roberto High Pressure Squeezing Unit , 10 tons pressure,
Delivery to Batcher, Cylinder Dryer, 2x 8 Cylinders, Diameter 800 mm, Exhaust
Hood, All incl. Temperature Controls, Dosing Pumps and Control Panel/Switch
Board, Heat Exchanger, For Light to Heavy Fabrics – max 560 gr/sqm, Speed
max. 12.5 - 125 m/min, Measures: Length 41 m, Width 3.8 m / 4.2 m at Steamer,
Height 4.4 m max.
1 Menzel Pad
Steam Dying Unit (suitable for Cotton and Blends),
For Washing
and Dyeing of light to heavy Fabrics (60 to 525 gr/sqm) , Model 1985/1991,
Working Width 1.8m, Roller Width 2.0 m, Entry Unit, J-Scray, E&L Width
Holders, BicoFlex Foulard, Accumulator, 15 m, Dye/Chemical Application Unit,
Steamer, Content 60 m, with Booster, Washing Compartment*, Model 50-2-3A,
Content 18 m, with Squeezing Unit, Dye/Chemical Application Unit, Dye Unit,
Content 16 m, with Squeezing Unit
Dye Unit, Content 12 m, with Squeezing Unit, 3 Washing Compartments*, Model
50-2-3A, Content 18 m, each with Squeezing Unit (1979/83/91), Roberto Final
High Pressure Squeezing Unit, J-Scray, Delivery to Batcher, Incl 4 Heat
Exchangers (stainless steel), Machines is working on Counter Flow System to
reduce Water Consumption, Water Consumption for Washing 6 – 8 liter/kg, Water
Consumption for Dying 8 – 10 liter/kg, Machine Measurement: Length 35 m,
Height 5 m, Width 5 m (incl. Heat Exch. + Switch Board), Speed 60 – 80 m/min,
Menzel Tower Washing Compartments
1 CIMI Open
Width Washing Range,
Model Lavanova 50, Year 1993, Working Width 2.0 m, Roller Width 2.2m, Fabric
Entry with Width Holders and Centralizing Unit, Soaping Unit, Content 12 m,
Corino Foulard, Pressure 15 tons, 4 Washing Compartments, Content 12 m, each
followed by Squeezers, 15 Tons Pressure, each with Hot and Cold Water
Connection, (*Comp. 3 + 4 with indirect Steam, max. Temp 98C), Cold Washing
Compartment, Content 8m, Squeezers, 15 Tons Pressure, Delivery to Plaiter or
Batcher, Barco Controls SEDO PC7000, Spare Squeezing Rollers, Water
Consumption 5 – 15 l/kg fabric, Speed max. 50 m/min
Bruckner
Stenter year 1996,
Fabric width
3600mm , 6 Chambers, Gas heated, Pin & Clip, gumming device, Entry 2 bowl
padder, 12 Burners, Exit cooling section and batcher , LOW HOURS
Complete Dyeing & Finishing Plant for cotton terry fabric, normal and special
fabric
beam dyeing machine MCS working width 3200, year 1993
beam dyeing machine MCS working width 3300, year 1999
beam dyeing machine MCS working width 3600, year 2003
beam winder machine FOR beams dyeing machine, year 1993
jigger LAMPERTI working width 3200, year 1980
jigger METALMECANIC working width 3200, year 1971
jigger METALMECANIC working width 3000, year -
drum drying machine CARROL, 9 drums working width 3300, year 1974
open width washing with 5 padding mangles-4 tanks winder machine + folder
plaiter working width 3200, year 1987
impregnation tank with padding mangle and beam winder machine, working width
3200, year 1997
Stenter converted METALMECANIC methan 2 sections, working width 3000, year
1956
padding mangle METALMECANIC, working width 3000 (with above mentioned stenter),
year 1971
weft straightener equipment MAHLO type FMC 10P BLADE RESIN EUROSYSTEMS, year
2002
preparation (table+ cradle + balance), year 1980
overflow BRAZZOLI MBC RUL 4 sections + heat exchanger of 1993, year 1980
overflow BRAZZOLI NF 572 RUL 4 sections + heat exchanger of 1993, year 1985
overflow BRAZZOLI NF 234 RUL 4 sections + heat exchanger of 1993, year 1981
Master centrifuge + electric board of 1998, year 1977
Master centrifuge + electric board of 1999, year 1979
rope opener BIANCO, year 2002
steam stenter MUZZI GESSNER working width 3200 4 sections + padding mangles 3
drums H.3200, year 1976
ORTHOMAT weft straightening equipment, year 2002
concentric BIANCO, year 2002
jigger TEXCEL type PJ 1400 working width 3600, year 2000
jigger TEXCEL type PJSDW working width 3400, year 2002
2 jigger INTES working width 3200, year 1990
dyeing padding mangle KUSTERS type 222.17.3200 NF 106-70364-01 + zoolling beam
winder machine type AVMD/F/A2 registration nr 94/118, year 1994
singeing machine INTES working width 3200 with impregnation tank and padding
mangle, year 1990
mercerised line + washing caber working width 3200 + 1 padding mangle with 3
drums, year 1990
REGGIANI stenter with burners, 5 sections, working width 3400, year 1990
pallets machine OFFRI, year 1990
gray giant rolls preparation MONTI 1992 and metal guard of 1994, year 1994
plastic packing machine, year 2003
crane for plastic packing machine, year 2003
roll winder machine EMIT VP A2MRS + folder EMIT VPA ZMDF , year 1991
three rolls calender with silk beta + electric termo-electric board tot.
weight 400 quintals, year 1990
spectral-photometer MACHBETH with hardware, software print, year 1996
two rolls padding mangles, year 1994
dyeing machine MATHIS LABOMAT, year 1997
volumetric dosing device, year 2002
dyeing machine MATHIS LABOMAT, year 2002
water cleaner, year 2002
diathermic fluid generator oil matic and evaporator production 5000 KG/H, pump
of KSB, year 1982
oil evaporator 12 combined 4 years after the purchase in the THERMA generator
of 1990, year 1986
diathermic fluid generator by THERMA a methane Kcal/H 3.000.000, year 1990
diatherm fluid generator by THERMA Kcal/H 200.000 a methane utilizable for
operation of the calender, year 1990
generating electricity (generator) of 385 kW for produce electrical energy
equipment ABB, year 1990
compressor GA 30 VSD power 30 kW (HP40) ATLAS pression 13 bar air production
L/S 72, year 2001
air compressor GA30P 10B V380 power 30 KW ATLAS pression 10 bar air production
L/S 63, year 1989
One multi
layer stentering machine, manufacture “Krantz”,
yoc 1992,
model KM.15, The machine is constructed for drying and heat setting any kind
of woven or knitted fabrics, mms. 2200 working width, mms. 2400 rollers width,
Fabric conveyor chains complete with anti-depinning system and automatic
lubrication, Fabric entry through scroll rollers and Erhardt+Leimer edge
uncurlers , Overfeed system ranging up to + 50% , Fabric edge gumming device,
Steaming unit Drying / heat setting chamber with six inside fabric passages
for abt. 34 mts. contents , Heating by diathermic oil circulation with
automatic temperature control and pre-set, Automatic control of fabric
temperature for heat setting process by “Permaset” system manufacture “Mahlo”,
Complete exhausting device , Fabric cooling
Fabric
edge trimmers complete with suction, Delivery in plaits or big batches with
centre-axle drive
1 INTES
gassingeing/desizing machine y.o.c. 1994,
usefull ww 2000 mm, 2 burners, entry with Bianco, brushing unit, de-sizing
chamber contents 20 meter, squeezer, with rotating station 5 heads.
Kleinewefers calender,
year of
construction 1984. Machinery completely overhauled in 2001., mms. 2300 working
width, mms. 2540 rollers width, entry frame with adjustable tension bars, four
calendering rollers ( two oil heated), 2 chrome plated steel, 1 special
plastic covering, , 1 cotton paper covering, automatic temperature control on
heated rollers, max. operation pressure of 60 tons, fabric delivery in big
diameter rolls, the machine is supplied complete with 1 wool paper spare
roller
complete
electrical installation V. 380 / 50, the machine is still in function,
Delivery time: prompt, lete electrical installation V. 380 / 50, with 1 wool
paper spare rollerof dyeing process
1 OSTHOFF
SINGEING LINE YEAR 2004, working
width 3,200 mm, 1 Monti stitching table, 1 brushing unit, 1 accumulator with 3
chutes, 1 Corino opener and centering device, 1 MTL pulling calander, 1
Osthoff VP99 beater/brushing unit, 1 Osthoff gas singer V4/2 4 sections, 1
Osthoff VP99 beater/brushing unit, 1 MTL pulling calander 1 double
impregnation desizing tank with squeezing padder, 1 double squeeze 3 rollers
rubber-steel-rubber padder with batching arm, 1 dust suction unit F2 with
rotary filter ST10, 1 dust compactor F2 ADD-A-800-1, 1 singeing dust calming
unit in water, 1 brushing dust calming unit, 1 dwell station with 12 rotation
positions on A-frames with individual motors
1 KLEINEWEFER
BLEACHING LINE WORKING WIDTH 3200 MM,
1 Benninger
Fortracta pre-washing tank year 2004, 1 Corino fabric accumulator with opener
and centering device, 1 CMI LD6/1 pre-washing tank year 2000, 1 Kleinewefers
squeezing padder, 1 Kleinewefers soda impregnation tank, 1 Kleinewefers
squeezing padder 1 Kleinewefer combined strand and roller bed steaming unit, 1
Corino centering and opener unit, 1 CMI LD6/2 hot washing tank year 2000, 1
CMI VA-3 cold oxygen washing compartment year 2000, 1 Kleinewefers squeezing
padder, 1 Kleinewefers oxygen impregnation tank, 1 kleinewefer squeezing
padder, 1 Kleinewefer roller bed steamer, 1 Corino centering and opening unit,
1 Kleinewefers washing tank, 1 Kleinewefer squeezing padder, 1 Kleinewefer
washing tank, 1 Kleinewefer squeezing padder 1 CMI LD4/1 washing tank year
2000, 1 CMI squeezing padder, 1 CMI LD4/2 washing tank year 2000, 1 CMI
squeezing padder, 1 CMI LD4/3 washing tank year 2000
1
Kleinewefers squeezing padder, 1drying stack with 12 cylinders (6 teflon, 6
steel), 1 dryeing stack with 12 steel cylinders, 1 Corino exit withpulling
padder - accumulator - opening/centering unit - non stop batcher, 2 heat
exchangers, 1 Polimetron H2O2 analiser, 1 Polimetron PH analiser, 1 Polimetron
NAOH
1 BABCOCK
ECON-AIR STENTER LINE YEAR 1998,
working
width 3200 mm, gas heated, 1 rope opener, 1 Bianco accumulator with opening/centering
unit on entry & exit, 1 Kusters padder with floating cylinders, 1 Mahlo weft
straightener with 6 reading heads type RFMC-10P year 1999, 1 Babcock stenter
5001/4007 ECON-Air, 7 chambers, gas heated, clip chain, 1 Mahlo weft
straightener with 4 reading heads MFRC-10P year 1999, 1 Bianco double
batcher, 2 steel tanks, 1000 liters, with mixer
1 BRUGMAN
ROPE BLEACHING WORKING WIDTH 3200 MM,
1 Monti
stitching unit, 1 accumulator, 1 open width prewashing, 1 Brugman prewashing
in rope TL4, 1 Brugman soda saturator, 1 JBOX soda steamer, 2 Brugman rope
washing tanks TL4, 1 Brugman oxygen saturator, 1 JBOX stem oxygenator, 1
Brugman rope washing tank TL6, 1 Brugman rope washing tank TL4, 1 rope opener
with centering/opening unit, 1 squeezing padder 3 rubber cylinders width 3200
mm , 1 padder for optic application, 1 Corino weft straightner for towelling,
1 plaiter, 2 stainless tanks with mixer capacity 1000 lt
1 ALEA TERRY
FABRIC DRYER YEAR 1987,
working width
3000 mm , 4 chambers , gas heated, self cleaning filters, exit with 2 separate
plaiters,
1 COM.IN.TEX
CONTINUOUS TUMBLER,
working width
1800 mm, gas heated , 2 chambers
1 FLASH LINE
(TO DEVELOP ITH - ROPE/OPEN WIDTH WASHING),
1 Arioli
impregnation padder working width 3000 mm, 1 Arioli vertical steamer content
12 mt
3 Arioli open
width drum washing tanks with squeezing padder, 1 hydraulic batcher , 4
Brugman rope washing tanks TL6 with squeezing padder, 1 Bianco rope opener
with centring & opening device, 1 squeezing 2 cylinders padder working width
3000 mm, 1 Ramallumin cylinders dryer 2 chambers ( 6 x teflon 6 x steel) 3000
mm,
1 Corino weft
straightner working width 1800mm, 1 plaiter working width 3000 mm, 1 Maier
electric batcher 2 arms
DYEING TERRY
COLD
PAD BATCH DYEING,
1 Monti
stitching table, 1 Monti accumulator, 1 Ceia metal detector, 1 Kuster padder
type 222.11.1800 working width 1800 mm
DYEING CLOTH
COLD PAD BATCH DYEING,
1 Monti
stitching table, 1 Monti accumulator, 1 Ceia metal detector, 1 Kuster padder
type 222.11.3000 working width 3000 mm
TERMOELETTRONICA COLOUR KITCHEN,
1 automatic
colour weighing, carousel 1 20 x 30lt. tanks, carousel 2 4x 50kg tanks & 12 x
30 kg tanks + 8 x30 kg available, 1 automatic liquefier type Termo Due year
2003, 4 stainless tanks with mixer capacity 2000lt, 4 stainless tanks with
mixer capacity 1000lt, feeding pumps
FAMATEX
STENTER FRAME
YEAR 1973, 1
Monti stitching table, 1 Corino weft straightner 1800 mm, 1 extracting &
compacting unit F2
STEAMER/POLYMERISER
1 ARIOLI HEATED BY STEAM AND OIL YEAR 1988, working width 3000 mm, double
plaiter , batcher
SALVADE
STEAMER FOR POLYMERISATION/ HEATH SETTING YEAR 1994
working width 3,200 mm, gas heated, exit onto Jumbo batcher
BABCOCK
STENTER FRAME YEAR 1999,
type
ECON-AIR, working width 3200 mm, gas heated
1
Kusters padder with floating rollers , 1 Mahlo weft straightener with 6
reading heads RFMC-10P, year 1999, 1 Stenter Babcock 5001/4007 ECON-Air , 7
chambers
clip chain, 1
Mahlo weft straightener with 4 reading heads MFRC-10P, year 1999, exit onto
plaiter batcher
KUSTER
CALANDER YEAR 1991,
working width
3200 mm , Simat de-batcher , CEIA metal detector , 2 bowls 1 x steel and
1 x racolan , exit onto batcher
LAMPERTI
RAISING MACHINE YEAR 1999,
working width
3,200 mm , continuous raising of both fabric sides, 24 raising rollers, dust
evacuation unit F2 , take-up onto batcher,
5 EXAMINATION
TABLES,LAZZATI,SIMAT &TESTA
ACCESSORIES, 177 CLOTH TROLLEYS, 136 TROLLEYS FOR PLAITED FABRIC, 1 PATER
NOSTER AUTOMATIC BEAMS STORE, 20 FORK LIFTS/TRANSPALLETS ETC, MANY ANCILLARY
MACHINES, WORKSHOP, LABORATORY
Textile
finishing mill
NO.
PC MAKE YOC WW DESCRIPTION
14661 1
THIES 1991/1998 HT-Dyeing machine, type
ECOSOFT 140/2 DS, 480 kg, THIES
PC control T 737
14671 1 THIES 1990/1998
HT-Dyeing
machine, type ECOSOFT 140/2 DS, 480 kg, THIES
PC control T 737
14901 1 SANTEX 1987 2200
Continue Tumbler,
type Santashrink, 5 chambers, steam heated,
plaiter, 2 set of nozzles
for open width and tubular fabric
15031 1
BENZ Laboratory padder
15041 1
BENZ Laboratory stenter
15071 1 JUNGHEINRICH 1999
Warehousing Fork Lift, 1,6 t, max. 7 m lifting height
Vald
Henriksen Jigger mod. “VACUJIG 12/2000”,
Yoc 1995,
Roller width 2000mms. Working width mms. 1800, Max capacity 1200 mts.,
Dyestuff tank, Main electrical box made in stainless steel, with
microprocessor controller Henriksen, Machine still in function and in perfect
conditions.
Discontinuous decatizing machine in autoclave,
T.M.T. Mod.
PF 2000 1203 MULTIPROGRAM, Autoclave diameter : 1203 , Construction year :
1993 , Winding roller diameter : 400 mm , Satin : length 650 meters, thickness
0,4 mm, length of the fabric 550 meters , Roller width : 1800 mm , Fabric
width : 1500 mm
1 Monforts
Stenter ,
6 chamber ,
-Year: 1990, With Mahno Weft Straightner, -Width: 200cm,
1 Hemmer
Decatizing
Machine , Year: 1992
1 Smith
Shearing Machine, Year: 1986
1 Ramisch
Kleinewefers Calender ,
Year: appr 1993, Model : RKK-360
1 Santex
Tensionless drier ,
Years: 1992,
Width: 2800mm
1 Monforts
Shrinkage Machine ,
Year: 1990,
Width: 2000mm
1 Morrison
Shrinkage Machine ,
Year 1990,
Width: 180cm, Felt unit: Φ1.6m
1 Japanese
Wakayama Shrinkage
Machine ,
Year 1990, Width: 1800mm, Felt unit: Φ 2200mm
1 STORK
Coating Machine,
Model C T-Ⅴ,
Year: 1998
1
Reconditioned
Monforts Hot
Flue Dyeing Machine , Width: 180cm
1 Stenter, 6
chambers ECON AIR, gas heated,
MAXXON
burners, pin & clip chain, ENGER padder year 1999, cooling zone, winder,
SIEMENS process control, complete reconditioned 2006, make: BABCOCK, working
width: 2600 mm, y.o.c.: 1995
Single Layer
Stenter, manufacture “Babcock”, second hand year 1985, reconditioned in 2001,
mms. 1800
working width, mms. 2000 rollers width , horizontal return chains combined
pins and clips , 7 chambers heated by direct gas , automatic control and
pre-set of temperature in each chamber , possibility to control the air blow
from the nozzles on right and back side of fabric , counter-flow air
circulation into the oven with system “Econair” of Babcock to ensure energy
saving during the operation , complete exhaust system , lint screen filters ,
total length of drying / heat setting chamber: mms. 21.000 , fabric cooling
, fabric delivery in big batches on A-frames , complete electrical cabinet and
installation on the machine , weft straightener “Mahlo” with 4 detection heads
, the machine is supplied complete with Padding Mangle, manufacture “Babcock”,
second hand year 1985, with operating speed in synchrony with stenter by
dancing roller
SINGLE LAYER
STENTER, Manufacture
“Bruckner”,
model VN.6, second hand year 1989, The machine is constructed for processing
woven and knitted fabrics. mms. 2200 working width. mms. 2400 rollers width,
vertical return chains overfeed system ranging up to + 40%, mms. 6000 length
of swinging entry arms, steamer, edge gumming device, 6 chambers for mms.
18000 total length of the oven heating by diathermic oil circulation heaters,
possibility to control the air blow onto the fabric right/back side, by-pass
system at the machine stop to prevent hot air blow onto the fabric,
extractable lint screen filters, exhausting system , cooling system, edge
trimmers with suction, fabric delivery in plaits, complete electrical
installation on the machine, complete thermal installation on the machine
Flat stenter
Bruckner, mod. VN-8,
second hand,
manufactured in 1998, started up in February 1999: mm. 2200 working width, mm.
2400 rollers width, introduction for woven fabrics and knitted fabrics, mms
6000 length of swinging entry arms overfeed system ranging up to + 50%,
steamer, edge gumming device, 8 drying/thermosetting chambers with direct gas
heating, Device “Permaset” with 6 optical heads, manufacturer Mahlo, for the
automatic control of the temperature inside the oven , Adjustment of the air
flow on the right/reverse side of the fabric, Length of the drying oven mm.
18,000, Complete exhausting system, Cooling system by ambient air blowing,
Additional cooling system by big diameter roller, with internal water
circulation , Edge trimmers with suction, Fabric delivery in plaits or big
rolls
1
COMPLETE OSTHOFF SINGEING AND DESIZE RANGE.
WW 2200 mm.
Speed 100 mpm. Fuel for burner LPG or Natural Gas, Configuration Scray at
entry , prebrushing , senge unit , post dedusting with wet dust collector ,
desize saturator with level and temp. control , recirculation system with auto
filter , contactless big batching and selwedge deflection unit. Fabric to
work 100 % COTTON , Lycra up to 5 % , other blends, 200 to 400 gsm fabric
quality.
1 Tumble
drier, Y.O.C. app. 1991, 6 chambers,
with conveyor
belt, thermo oil heated, make: BABCOCK, working width: 2200 mm, roller width:
2400 mm
1 Stenter, 6 chambers ECON AIR, gas heated,
MAXXON
burners, pin & clip chain, ENGER padder year 1999, cooling zone, winder,
SIEMENS process control, complete reconditioned 2006, make: BABCOCK, working
width: 2600 mm, y.o.c.: 1995
01 Sanforizing machine, 1982 Manufacturer :
MONFORTS , Y.O.C. : 1982, Table width : mm. 2000, Working width : mm. 1800,
Electrical tension : 380 Volt – 3 phases- 50 Hz, Machine Processing : Shuttle
Fabric Sanforizing original, cycle with caoutchouc sleeve, Machine Description
: Entry : big roller or folder, n°02 feeding cylinders, N° 1 steaming
vertical box plus hot cylinder, Small clips chain lifter mm.1400, Monforts
shrinking group with 3 cylinders with caoutchouk sleeve, (ground as new), Felt
palmer (calender with 2 cylinders of diam.2000 mm.and 800mm.and felt band) ,
N° 1 water cooled cylinder, C.C. motor powers, Exit : big roller or folder
2 Padders
type BQ 02/3800, 2 rollers,
rollers shore
75°, rollers dia. 390mm, for impregnation and squeezing, make: SUCHY, working
width: 3600 mm, roller width: 3800 mm, y.o.c.: 2000
1 Santex
Dryer type Santashrink Jumbo,
built 1991,
ww 180 cm, rollers' width 200 cm, with 4 drying chambers, each chamber has
length of 2 m, the drying chambers had 2 floors, plaiter on the exit.
1 Santex
Pretreatment Range,
built 2002,
type Santableach, ww. 220/180 cm, suitable for woven and knitted fabrics with
low tension, entrance with draw roll, storing unit, Erhardt & Leimer centering
unit, Super Actiwash 1 washing unit 1, squeezing unit, Super Actistore 1
washing unit, squeezing unit, storing unit, Actistore 2 washing unit,
squeezing unit, Actiwash 1 washing unit, squeezing unit, neutralisation unit
1,squeezing unit, Actiwash 2 washing unit, squeezing unit, impregnation unit,
squeezing unit, steaming unit (rolls), Actiwash 3 washing unit, squeezing
unit, Actistore 3 washing unit, squeezing unit, Actiwash unit 4+5+6 with each
squeezing unit, Actiwash 7 washing unit, squeezing unit, impregnation unit,
squeezing unit, storing unit, plaiter and A-frame winder.
Brückner
Stenter VN 18/7,
built 1974,
ww. 180 cm, stenter frame for drying and fixation with 7 drying fields, with
gas and steam heating system, equiped with Artos padding machine (padder),
Fleißner pre-dryer, Küsters padding machine (padder) typ 222.52.1800,
controlled exhaust ventilator, three-phase A/C electrical power, vertical
chain, cooling field, Mahlo straightening unit type RFM C 94 H on the exit,
plaiter, and separate Menzel A-frame winding system.
1 Brückner
Stenter VNL 18/7,
built 1984,
type VNL 18/7, width 180 cm, stenter frame for drying and fixation with 7
drying fileds with steam and gas heating system,
cloth guide system from Erhardt & Leimer (LP 0103 and KF 2064), Kleinewefers
padding system, (option: with Mahlo straightening unit typ RFMC - 10A),
cooling field, plaiter and A-frame winder.
1 Fleisner
Open Width and 1 Brückner Rope Washing Machines,
-- 1 Fleisner Open Width Washing Machine, built 1984, type T 5594, ww. 180 cm,
with Erhardt & Leimer cloth guiding unit, dip unit, draw rollers / unit, 4
screening drums and 5 squeeze rollers.
-- 1 Brückner Rope Washing Machine, built 1989, type Delphin D12, with 12
chambers electrical power 26 kw, steam heated 2,5 bar, machine speed from 10 m
/ min up to 150 m / min, with separat water circulation for each chamber.
1 Franz
Müller Raising Machine,
Built 1962,
type TR1, ww. 220 cm, nip roll and heating cylinder, speed 10-30 m/min, 30
raising rollers, outlet with plaiter
1 Brückner
Rope Washing Machine,
built 1988,
type Colorado 10, with 10 chambers electrical power 26 kw, steam heated 2,5
bar, machine speed from 10 m / min up to 100 m / min, with separat water
circulation for each chamber, Bianco squeezing unit and Bianco rope opener,
incl. plaiter and A-frame winder.
1 Küsters
Jigger,
built 1989,
ww. 160 cm., roller width 1800 mm
1 Brückner
Stenter VN 18/7,
stenter frame
for drying and fixation with 7 drying fields, equipped with gas and steam
heating system, cloth guide system from Erhardt & Leimer, (KF 2064), equiped
with pre-dryer and Kleinewefers padding system (year 1984), type Bicoflex -
1800 mm, and Küsters padding system type 222,52-1800,
cooling field, plaiter and A-frame winder on the exit
1 Stenter
frame, 5 chambers, gas heated,
horizontal
pin chain, KÜSTERS dyeing padder, BIANCO weft straightner (app. 1990), winder,
plaiter, complete reconditioned 1991, burners just revised 2006, make:
MONFORTS, working width: 1800 mm, y.o.c.: 1979
1 x Santex
Open Width Washing Machine,
Built 1998,
type Actiwash, ww. 180 cm, for washing after printing for woven and knitted
fabrics, entrance, draw roll, storing unit, Erhardt & Leimer centering unit,
Super Actiwash 1, squeezing unit, Actiwash 2+3+4 with each squeezing unit,
charging box 1, Actiwash 6 washing unit, squeezing unit, charging box 2+3,
Actiwash 7, squeezing unit, neutralisation unit, Actiwash 8, squeezing unit
(10 t), plaiter and overbridge system to a possible dryer
(a dryer is not included in the offer!).
1 x Franz
Müller Raising Machine,
Built 1962,
type TR1, ww. 220 cm, nip roll and heating cylinder, speed 10-30 m/min, 30
raising rollers, outlet with plaiter
1 x Brückner
Rope Washing Machine,
Built 1988,
type Colorado 10, with 10 chambers electrical power 26 kw, steam heated 2,5
bar, machine speed from 10 m / min up to 100 m / min, with separat water
circulation for each chamber, Bianco squeezing unit and Bianco rope opener,
incl. plaiter and A-frame winder.
1 x Küsters
Jigger,
Built 1989,
ww. 160 cm., roller width 1800 mm
1 x Brückner
Stenter VN 18/7,
Stenter frame
for drying and fixation with 7 drying fields, equipped with gas and steam
heating system, cloth guide system from Erhardt & Leimer, (KF 2064), equiped
with pre-dryer and Kleinewefers padding system (year 1984), type Bicoflex -
1800 mm, and Küsters padding system type 222,52-1800,
cooling field, plaiter and A-frame winder on the exit
1 x BRUECKNER
STENTER, 1996,
Type HN 22/4,
Working width 2200 mm, 4 chambers, cooling zone, steam heated, clip chain,
mechanical weft straightener, Krantz Padder (approx. 1970), exit plaiter , or
A-Frame
01 CONTINUOS
WASHING MACHINE,
TYPE:
CONTILANA HPQ 02, YOC 1999, 01 M-TECH ( MENSCHNER) CONTINUOS WASHING MACHINE
TYPE: CONTILANA HPQ 02, YOC 1999, ROLLER WIDTH 200 CMS, WORKING WIDTH 180 CMS
01 FABRIC
FINISHING MACHINE M.A.T.
TYPE TURBOMAT
FOUR SEASON 2C-SM/500, 01 FABRIC FINISHING MACHINE M.A.T. TYPE TURBOMAT FOUR
SEASON, 4 ROPES, YOC 1995, TYPE: FOUR SEASONS 2 C-SM/500
01 SHRINKOMAT
SHRINKING MACHINE ,
TYPE:
SHRINKOMAT SP-1, YOC 1999, 01 M-TECH (MENSCHNER) SHRINKOMAT SHRINKING MACHINE,
TYPE: SHRINKOMAT SP-1, YOC 1999. ROLLER WIDTH 200 CMS, WORKING WIDTH 180 CMS,
MACHINE TOTAL LENGTH 8 METER, MACHINE CONSISTING OF: ENTRY, PRE- STEAMING
SYSTEM, SCHOCK, STEAMING SECTION, RELAXING SECTION, SCHOCK HEATING SYSTEM ,
AND 1 COOLING SECTION FOR COLD SCHOCK OF THE FABRIC.
01 CONTINUOS
“MINICRAB” FINISHING MACHIN ,
Type DCM 01,
yoc 1999, 01 M-TECH (MENSCHNER) CONTINUOS “MINICRAB” FINISHING MACHINE, TYPE:
MINICRAB DCM 01, YOC 1999, ROLLER WIDTH 200 CMS, WORKING WIDTH 180 CMS
NR.1
CONTINUOUS DECATIZING MACHINE
« SPEROTTO » MOD.MD/2, MULTIDECAT – 2 , YOC.1999, MACHINE IN PERFECT
CONDITIONS.
2 WASHING
MILLING MACHINES “MAT”
MOD.TURBOMAT
, 1994-6, MACHINES EQUIIPED WITH : NR.2 CHANNELS (4 ROPES),“BONGOSSI”, WOODDEN
CYLINDERS, STAINLESSTEEL MILLING BOX PNEUMATIC, SYSTEM, A.C MOTORIZATION +
INVERTERS, MACHINES IN PERFECT, CONDITIONS RECONDITIONED BY LOCAL OFFICIAL MAT
WORKSHOP.
STENTER
MACHINE “FAMATEX”
YOC.1979,
WW.2000MM, NR.5 CHAMBERS WITH GAS HEATING SYSTEM,FOULARD,HORIZONTAL CHAINS,
FOLDER + BIG BATCH AT EXIT, MACHINE IN GOOD CONDITIONS.
STENTER
MACHINE “BABCOCK”
YOC.1991 ,
WW.1800MM, NR.9 CHAMBERS GAS HEATING SYSTEM,MAXON BURNERS WITH MODULATION
FLAME, A.C MOTORIZATION WITHOUT INVERTERS AND NO PLC SYSTEM, HORIZONTAL
CHAIN PINS WITH ANTIDEPINNING SYSTEM, FOULARD + CORINO WEFTSTRAIGHTNER AT
INLET, OVERFEEDING SYSTEM UP TO +50%, EXIT BY FOLDER AND BIG BATCH. MACHINE IN
PERFECT CONDITIONS
STENTER
MACHINE “BABCOCK” YOC.1992 ,
WW.1800MM.
NR.6 CHAMBERS GAS HEATING SYSTEM,MAXON BURNERS WITH MODULATION FLAME, A.C
MOTORIZATION WITH INVERTERS AND PLC SYSTEM, HORIZONTAL CHAIN PINS WITH
ANTIDEPINNING SYSTEM, CORINO WEFTSTRAIGHTNER AT INLET,
OVERFEEDING SYSTEM UP TO +50%, EXIT BY FOLDER AND BIG BATCH. MACHINE IN
PERFECT CONDITIONS.
STENTER
MACHINE “BABCOCK” YOC.1992 ,
WW.1800MM.
NR.6 CHAMBERS GAS HEATING SYSTEM,MAXON BURNERS WITH MODULATION FLAME, A.C
MOTORIZATION WITH INVERTERS AND PLC SYSTEM, HORIZONTAL CHAIN PINS WITH
ANTIDEPINNING SYSTEM, CORINO WEFTSTRAIGHTNER AT INLET,
OVERFEEDING SYSTEM UP TO +50%, EXIT BY FOLDER AND BIG BATCH. MACHINE IN
PERFECT CONDITIONS.
NR.2 RAISING
MACHINES “LAFER” MOD GRI 90,
YOC.1999,
WW.2000MM. MACHINE EQUIPPED WITH : NR.2 SUPEIMPOSED DRUMS EACH, NR.24 RAISING
ROLLS EACH DRUM, A.C MOTORIZATION + INVERTERS WITH COMPUTER AND PLC CONTROL,
FOLDER AT EXIT, WITHOUT SUCTION DEVICE.
MACHINES LOOK LIKE NEW
EMBOSSING
MACHINE “BERGI” MOD.PR18
YOC.1996,
WW.1800MM. OLEODINAMIC SYSTEM, DIATERMIC OIL HEATING SYSTEM, NR.1 SMOTH
CHOMIUM CYLINDER. MACHINE IN PERFECT CONDITIONS.
NR.6
SEWING/CUTTING MACHINE
NESI & PUGI
MOD.TC 14, YOC.1990-92, MACHINES IN VERY GOOD CONDITIONS
NR.2 COMET
RAISING MACHINES
MOD.GASPARO X
2 , YOC.1995, WW.1800MM, 24 RAISING CYLINDERS EACH (NR 4 DRUMS) , PIV , D.C
MOTORIZATION,
FOLDER AT EXIT.
SPEROTTO
RIMAR STEAMING
MACHINE
MOD.STABILA, YOC.2000, BRUSHING MACHINE AT INLET, UNDERPRESSURE TUNNEL, FOLDER
DEVICE AT EXIT.
NR.1 STEAMER
MACHINE “SPEROTTO”
MOD.S-GZERO,
YOC.1993 , WW.1800MM, ONE STEAMING TUNNEL, VIBRATEING CARPET (PLUS ONE SPARE
CARPET NEW) PHOTOCELL SYSTEM TO FEEDING THE FABRICS ON CARPET, EXIT IN SMALL
ROLLS OR FOLDER DEVICE WITH ADJUSTABLE FOLD SIZE.
NR.1
POLISHING MACHINE
“COMET” MOD
PRA 108 , YOC.1999, MACHINE WITH , WW.1800MM, ROLLS ACCUMULATOR DEVICE AT
INLET, IMPREGNATION UNIT WITH DEEP CYLINDER AND BRUSH, POLISHING UNIT WITH
ELECTRIC HEATED RESISTANCES ON CYLINDER, EXIT WITH BIG ROLL DEVICE.
NR.1 JEGGER
“MEZZERA” 450 KGS,
YOC.1999.
MACHINE PERFECT
1 KUSTERS
222.11 - 1800 dye-padder y.o.c. 1989,
good
condition, with 2 "swimming" rollers width 2000 mm, ww 1800 mm, with control
cabinet and preparation vat, no exit.
1
boiler house for steam - heating medium: diesel oil,
2 boiler
Viessmann, type TURBO MAT RV - 19037-14, y.o.c. 2000, power 2 x 750 kW
capacity: 1200 kg steam each/h, power cubicle, working pressure - 8 bar, 25
pcs oil tanks with capacity 1000 l each, water purification plant, producer:
EPURO SA, degasifier, 2 pcs modulus chimney - height 16 m, fi 500 mm, boiler
fittings, Using of boiler house from 2000 to 2002, only 18 months
No.01 ALEA
multilevel stenter, 1985,
model S/8-50 with 8 passages, fabric contents 50 mts, working width 1800 mm
oil heated. DC motors. Overfeeding. Pin clip chain. Electric panel.
Introduction frame with centering device, expander and weftstraightener.
Cooling cylinder. Exit fold and roll. Speed: from 8 to 60 m/min.
LISA CARBON
BRUSHING MACHINE,
WW 1800 MM.,
2001 YEARS, ONE CARBON BRUSH CYLINDER, WE ARE GIVING ONE SPEQURE CYLINDER MORE
MAINLY FOR WEAVING FABRIC, WORKING CONTIDITIONS.
STEAMER
Babcock,
ww ; 360 cms,
3 layers , cloth content : 360 m, Heater Sytem : Direct Indirect, Steam heater
and Oil Heating. Saturation Tank, Control Panel
Arioli Steamer: Mini "G" + BV Steam Ager -Type VAPO 2000C 300 MT BV RW 2200
-Year : 2000 installed in 2001 -Fabric Capacity up to : 300 meter -Roller
Width : 220 cm -Useful Width for one strand 190 cm, Speed : 6 to 60 meter /
min Dwell Time : 5 to 50 min
Arioli
Continous Loop
Steamer :
Model 21041, L :210 cms, Cloth content : 200 metres, speed : 0 to 20 metres
per minute, . Year 1994
STENTERS
Bruckner, ww : 2000mm, 5 chambers, Oil Heated, Padder , Pin Type, Year 1994
Bruckner, ww : 2000mm, 6 chambers, Oil Heated, Padder , Pin Type, Year 1987
Bruckner, ww : 2000mm, 5 chambers, Oil Heated, Padder , Pin Type, Year 1991
Textima , ww : 2000mm, 8 chambers, Oil Heated, Padder , Pin Type, Year 1987
CURING
MACHINE,
Artos, 5
chambers, Roll Width : 1800mm, ww: 1600mm, Vol chamber: 7.5 m3, Capacity per
chamber : 15 M, Nos of rolls per chamber : 21, Speed : 80 metres per minute,
Chamber 1 and 2 steam heated, chamber 3 , 4 and 5 : Oil Heated,, Exit :
Invertor Drive Big batcher , Year 1992
PAD STEAM
line, producer:
Babcock, with padder Goller, rolls width 2000 mm, working width 1800 mm, y.o.c.
1988, overhaull in Year 2000,
PAD STEAM - dyeing and preparing range
1 entrance with KF 20 from Erhardt+Leimer
1 padding mangle Goller for impregnating liquor
Washing machine:
1. wash section, capacity 30 m, 1. mangle 5 ton,
2. wash section, capacity 20 m, 2. mangle 5 ton,
3. wash section, capacity 20 m, 3. mangle 10 ton,
4. wash section, z natryskiem, 4. mangle 5 ton,
1 chemical finishing plant
1 dyeing padding machine Babcock
1 steamer Babcock
Washing machine:
1. wash section, capacity 15 m,
2. wash section, capacity 10 m,
3. wash section, capacity 20 m,
4. wash section coupled with 5. wash section, capacity 50 m,
6. wash section, capacity 30 m,
7. wash section, capacity 25 m, 1 mangle 10 ton.
NO. 1 washing
plant Make MCS ,
Year 1994,
working width 1800mm, with 4 tanks for washing , with 4 squeezers , Heat
exchangers against out flow, Entrance with Centring E+L , Delivery Big Batch
roll, With control panel , With final squeezer at exit
NO. 1
Continuous Bleaching Range Make MCS,
COLD
bleaching, year 1995, with complete control panel , process control both
temperature and time , with One tank for bleaching cold for fabric immersion
with soda and oxygen water., Other 3 tanks for washing and with squeezers,
Squeezers with 2 cylinders with inverters, with 2 Feed tanks of 100kg each,
entrance with E+L guides KF 2020, with delivery Big batch, with 10 Pneumatic
trolleys for storing of fabric on big batch , after bleaching with single
motor connection to turn them slowly
NO. 2 Jiggers
Make Texcel,
Year 1997/98,
working width 1800 mm, table width 2000 mm, diameter 1400 mm, speed 140m/min,
fabric Tension 5-50kg, Temperature 98°C, Steam heated, Programmer, Colour
kitchen automatic with 2 tanks and mixers, With 1 tank for colour and No 1
tank for additives, Machines excellent 380v 50hz.
NO. 1 Stenter
Frame Make Santa Lucia
year 1997,
width 1800 mm, with 7 chambers, with entrance Foulard Beta 3 cylinders, with
coating tank with double coating,
with
delivery squeezers, with weft mechanical straigthner make Santa Lucia , Gas
Metano Heated , with entrance chain with selvedge guide, Clip type chain (pins
can be fitted - chain made for both), Delivery Cooler , Control panel , With
delivery Big batch Roll, Delivery with fabric accumulator to remove big roll
without stopping machine
Two
exhaust fans on chambers, With all valves and connections, 380v 50hz
Fully
Reconditioned Gas Singeing Machine,
Maker:
Osthoff, Germany, Yom: 1997 year, Model: VP77/1, Burner width: 2,000 mm,
Working width:1,900 mm, Usage: cotton, T/C, with standard accessories,
Consisted of following parts.
cloth guide, 2 nos x burner, 1 nos x brush box., exhaust fan., plaiter., control
panel.
1 RAMISCH
KLEINEWEFERS calander NIPCO -
I, ww 3200
mm, 2 bowls width 3400 mm (steel - racolan), electric heating, yoc 1990,
excellent condition, pressure 100 ton, metal-detector, with spare - racolan,
batching + debatching
4 V.
HENRIKSEN jiggers,
rollerwidth 2000 mm, ww 1800 mm, complete with cover, y.o.c. approx. 1985
Stenter Bruckner, mod. VN-8, second hand,
manufactured
in 1998, started up in February 1999, mm. 2200 working width, mm. 2400
rollers width introduction for woven fabrics and knitted fabrics, mms 6000
length of swinging entry arms, overfeed system ranging up to + 50%, steamer,
edge gumming device
8
drying/thermosetting chambers with direct gas heating, Device “Permaset” with
6 optical heads, manufacturer Mahlo, for the automatic control of the
temperature inside the oven , Adjustment of the air flow on the right/reverse
side of the fabric, Length of the drying oven mm. 18,000, Complete exhausting
system, Cooling system by ambient air blowing, Additional cooling system by
big diameter roller, with internal water circulation , Edge trimmers with
suction, Fabric delivery in plaits or big rolls
Single Layer
Stenter, manufacture “Babcock”,
second hand
year 1985, reconditioned in 2001, mms. 1800 working width, mms. 2000 rollers
width horizontal return chains combined pins and clips, 7 chambers heated by
direct gas , automatic control and pre-set of temperature in each chamber ,
possibility to control the air blow from the nozzles on right and back side of
fabric , counter-flow air circulation into the oven with system “Econair” of
Babcock to ensure energy saving during the operation ,
complete exhaust system , lint screen filters , total length of drying / heat
setting chamber: mms.21.000 , fabric cooling fabric delivery in big batches
on A-frames, complete electrical cabinet and installation on the machine, weft
straightener “Mahlo” with 4 detection heads, the machine is supplied complete
with Padding Mangle, manufacture “Babcock”, second hand year 1985, with
operating speed in synchrony with stenter by dancing roller
1997 C2000
TUBE TEX COMPACTOR,
86” WIDE , WITH MAHLO OPENER AT ENTRANCE , E&L GUIDE PLATES , TUBE TEX BATCHER
AT EXIT , WITH STITCH MONITOR
1 Loop-Ager/Steamer
STORK
type HS III, year 1993, 2.200 mm roller width for max. 2.000 mm working width,
150 m cloth content, steamheated,
1
Kleinewefers Bleaching Line,
working width
320 cm, consisting of, 1 Benninger Fortracta pre-washing tank year 2004 , 1
Corino fabric accumulator with opener and centering device , 1 CMI LD6/1
pre-washing tank year 2000 , 1 Kleinewefers squeezing padder , 1
Kleinewefers soda impregnation tank , 1 Kleinewefers squeezing padder , 1
Kleinewefer combined strand and roller bed steaming unit, 1 Corino centering
and opener unit , 1 CMI LD6/2 hot washing tank year 2000 , 1 CMI VA-3 cold
oxygen washing compartment year 2000 , 1 Kleinewefers squeezing padder , 1
Kleinewefers oxygen impregnation tank , 1 Kleinewefer squeezing padder , 1
Kleinewefer roller bed steamer , 1 Corino centering and opening unit , 1
Kleinewefers washing tank , 1 Kleinewefer squeezing padder , 1 Kleinewefer
washing tank
1 Kleinewefer squeezing padder , 1 CMI LD4/1 washing tank year 2000 , 1 CMI
squeezing padder , 1 CMI LD4/2 washing tank year 2000 , 1 CMI squeezing
padder
1 CMI LD4/3 washing tank year 2000 , 1 Kleinewefers squeezing padder ,
1drying stack with 12 cylinders (6 teflon, 6 steel) , 1 dryeing stack with
12 steel cylinders ,
1 Corino exit withpulling padder - accumulator - opening/centering unit - non
stop batcher, 2 heat exchangers, 1 Polimetron H2O2 analiser , 1 Polimetron PH
analiser
1 Polimetron NAOH, Bleaching kitchen - stocking tanks - chemical product,
automatic bleaching preparation unit
1 Babcock
Econ-Air Stenter,
year 1998,
working width 320 cm, gas heated, with, 1 Bianco accumulator with opening/centering
unit on entry & exit, 1 Kusters padder with floating cylinders, 1 Mahlo weft
straightener type RFMC |
