1 Sanfor Machine, Monforts,
1971, Type: FKSG, Working Width 1800mm, Reconditioned 2004.
Jigger Vald Henriksen,
Year of manufacture : 1967, Working width : 1600 mm, Quantity : 3 pc,
Condition : usable.
1 MONFORTS "SANFOR" machine
y.o.c. 1978, ww 1650 mm, mod. FK/SG, entry, humidification chamber,
baby-stenter clipchain, rubberbelt device, Palmer dryer drums 2000/1000 mm,
plaiter.
1 MONFORTS "SANFOR" machine type FKSG, y.o.c. 1971,
rollerwidth 1800 mm, steaming cylinder (yoc 2004) at input, digital indication
of fabric-width (yoc 2004), renewed electric system, with Mahlo Orthomat-74S
weftstraightener (yoc 1983), shrinking - device with rubberbelt,
Palmer-calander, cooling drum.
Stenter Machine, 8
Chamber Gas Type Direct Heating, year 2001, Make: MiKwang Machinery, Roll
Width : 2200 mm,
Stenter Machine,
6 Chamber, Make: Ilsung,
Coating Machine,
1 Chamber Indirect Heating Type, Year 2003, Make: Korean , Roll Width : 2000
mm.
Coating Machine, 2
Chamber Indirect Heating Type, Year 2003, Make: Korean , Roll Width : 2000 mm.
Direct Coating Machine, Roll
Width : 2000 mm, Year: 2000, Make: BuKwang Machinery
Calender Machine, 2
Ball, Year 1998, Make: Korean
Hot Oil Heater, 1200000 Kal/h, 1996, DaeKwang Boiler
Once Through Boiler, 0.5 ton, 2002, Daelim Royal
1 KRANTZ stenter working width 3200 mm,
yoc 1989, 7 bays, combined chain pins/clips, gasheating, with 2 padders and 1
Mahlo weftstraightener at input.
1 KYOTO stenter working width 1800 mm,
y.o.c. 1989, 6 bays, gasheating, horizontal pinchain, with pre-dryer and
vacuum-device and 2 padders at input, weftstraightener.
1 SANTEX open width washing machine, yoc. 1998,
working width 1800 mm, modell ACTIWASH, suitable for woven and knitted
fabrics, entry with centralising device E+L, 7 washing compartments "Actiwash"
each with squeezer, neutralisation, final squeezing padder, plaiter at exit.
1 MATHIS pad steam installation for laboratory, yoc. 1989,
width 350 mm, consisting of :
1 squeezing/ impregnation padder, 1 vapo pad steam, 5 washing chambers, 1
infra-red dryer MATHERM modell GC600, 1 hot air dryer /oven, electric
resistance,
roller at exit.
Dyeing & Finishing Lines
Line 1.
Description Production
Year
Metal detector at the
inlet 1993
Machine inlet from Erhart + Leimer
1991
Pre-wetting and dwelling belt (ZOLLIG)
1995
Kusters washing section (2 chambers)working width 3.20 cm 1991
Kusters intermediate squeezer working width 3.20 cm 1991
Kusters final squeezer working width 3.20 cm 1991
Tensionless dryer from TEXIMA (width 3 mt and length
6mt) 1991
Stenter frame from TEXIMA (6 chambers/total length 18 mt -
working width 3,2 mt.. - thermal oil heating)
1991
Mahlo weft
straightener 1991
Line 2.
Description Production
Year
Metal detector at the
inlet 1995
Machine inlet from Erhart + Leimer
1995
Pre-wetting and dwelling belt (ZOLLIG)
1995
Kusters washing section (2 chambers) working width 3.10 cm 1995
Kusters intermediate squeezer working width 3.20 cm 1995
Kusters final squeezer working width 3.20 cm
1995
Tensionless dryer from STENTEX (width 3 mt and length 6 mt) 1995
Stenter frame from STENTEX (6 chambers/total length 18 mt -
working width 3.10 mt – natural gas heating )
1995
Mahlo weft
straightener 1995
Folding machine (4 folds) EDELMANN ww 3.00 mt 1991
Calendar from BIZMAK ww 3.60/typ BT 1011
2000
CALENDER KUSTERS,
ROLLER WIDTH 3200 MM, 5 CYLINDERS. LOWER OF RACOLAN + STEEL + 3 COTTON.
PRESSURE WATCH 250 BAR, ANOTHER 10 BAR, EXIT FOR A-FRAME
Stenter,REGGIANNI,1992 yom,220cm ww,
6 chamber, horizental chamber, gas-heated, PLC control, Küstner fuluard and
mahlo, I can send you photos if it is workable for you,
NO. 1 VERTICAL STENTER MAKE BRUCKNER,
Multi layer, 5 plus 1 passages, working width 2300 mm, gas heated, new chain,
year 1987, recently reconditioned,
in excellent condition, delivery big batch, entrance batch, weft straightener
mechanical type with selvedge cutter, Temp max 210-220 °c suitable for knit
fabric with foulard BITA, with No. 1 batching device, with Testa automatic
fabric measurement packing machine, Control panel , voltage 380V 50Hz.
2 pcs vertical finishers SSR2,
serials: 451.0103, 451.0104 , yoc 1978, 20 heads, tube 285mm,
OPEN WIDTH COMPACTOR,
Brand Name: MUZZI, 1995 Years, Rubber blanket total power 10 kw dc motor.,
With speed control and heat control. Machine has pressure heats watch.
M.CROSTA Shearing machine
year 1999
COMET Polishing machine
(Polrotor), year 1998, work. width 1998.
Bruckner 6 bay gas stenter 1994,
Bianco debatcher, Planotex web guiding system, Bruckner 2 bowl pad with tank
and pump, Bianco fully automatic weft straightener,
Weko moisturising system for cotton, E&L gum amd trim, Mahlo gravimat, 6m knit
goods entry with steam bay, Pin/clip vertical return chain, Junkers gas
burners
Some extraction ducting, 2 cooling zones,
01 MONFORTS SANFORIZING MACHINE, TYPE FKSG, WW. 1800MM,
RECONDITIONED IN 2004, NEW GUIDE ( INLET ) TROUGH, NEW RUN OUT ( OUTLET )
TROUGH, NEW STEAM CYLINDER, NEW DIGITAL FABRIC WIDE MEASUNRING DEVICE MADE BY
E&L, NEW ELECTRCI / ELECTRONIC , CONSISTING OF : INLET WITH TENSIONING ROLLER,
FEEDER ROLLER, INLET TROUGH WITH DANCING ROLLER, BREAKING ROLLER, CLOTH
GUIDING DEVICE KF2020 AND SECOND TENSIONING ROLLER, MAHLO ORTHOMAT RFMC 74 S,
YOC. 1983, STEAM CYLINDER WUMAG, CALANDER WITH RUBBER CLOTH, INCL. SPARE
CLOTH, FELT CALANDER INCL. SPARE FELT, COOLING DRUM, DIGITAL FABRIC WIDE
MEASUNRING DEVICE MADE BY E&L, OUTLET WITH TENSIONING AND FEEDER ROLLERS,
OUTLET TROUGH DANCING ROLLER, BREAKING ROLLER, CLOTH GUIDING DEVICE KF2020,
WINDER, THE MACHINE IS STILL RUNNING AND IN GOOD CONDITION
Fully Reconditioned Gas Singeing Machine,
Maker: Osthoff, Germany, Yom: 1997 years, Model: VP77/1., Burner width: 2,000
mm., Working width:1,900 mm.
Usage: cotton, T/C., with standard accessories. Consisted of following parts.
-- cloth guide., -- 2 nos x burner., -- 1 nos x brush box., -- exhaust fan.,
-- plaiter., -- control panel.
Fully reconditioned washing range,
Maker: Pyung -An machinery co.,ltd , Korea., Yom: 1999 years ( fully
reconditioned at 2007 years), Roller width: 2,000 mm.
Working width: 1,900 mm., Complete set with standard accessories., Consisted
of following parts.
-- Guide roller( entrance), -- " J " box., -- weft straghtner., -- 6 sets x
padding mangle/ 6 sets x washing tank., -- 2 sets x chemical tank.,
-- batching device.
-- plaiter., -- control pandel.
Range for Drying and Thermofixing,
High Entry with Expanders and Cloth Guiders, TEPA Vacuum extractor. TEPA
Foulard roller width 2.400 mm. 2 cylinders pneumatic pressure. , BIANCO
Weftstraightener , Type Radizitrama VDTEX year 1.990. Roller width 2400 mm.
with 6 heads., BRUCKNER-SABEN Stenter width 2.400 mm.,Year 1991. E+L
Introduction KR4820 . Photocell FR1501., Automatic Over Feed ( Salvia
Electronic) ,6 Mts. entry, Selvedge Glueing, Steamer , Vertical Pin Chain.
MAHLO Permaset VMT-9B year 1990., 8 Chambers . Oil heated, Selvedge Cutters,
Unit Cooling. Outlet by Big batcher with Loads Cells and Folder.
1 Stenter frame BRUCKNER, yoc. 1986,
working width 1.800 - 1.900 mm, 4 chambers - gas heating
GOLLER BLEACHING RANGE. YEAR 1994 WORKING WIDTH 1800,
GOLLER CONTINUOUS BLEACHING RANGE 1.800MM WORKING WIDTH YEAR 1984.
ENTRY WITH BIANCO CENTRALISING GUIDER., 3 PRE WASHING TANKS WITH PADDERS,
TIGHT STRAND AND ROLLER BED STEAMER, 5 WASHING TANKS WITH PADDERS TAKE VIA
HEAVY SQUEEZE PADDER ONTO A FRAME BATCHER.
1 BECA inspecting/rolling machine, yoc. 2000,
working width 3000 mm, rollerwidth 3200 mm, entry with guiding, inspecting
table, longitudinal cutting, 3 systems scotchage, weighing system with table,
automatic width-adjustment, tangential winding, electric photo-cels.
1 BIANCALANI AIRO 1000 tumbler/softening machine, yoc 1994,
2 ropes, steam + gasheating, with dust-exhaustor + dust-collector.
Used Fararo Knit Tube Compactor,
Maker: Fararo, Italy., Yoc: 1994 year, Roller width: 60 inch., consisted of
following parts.
-- ebtrance., -- Guide & heating parts., -- Filding part., -- electric control
parts.
1- Used Stentex Stentotherm-3300, Series 940/264/00,
gas fired, verticle pin chain, 8 chambers, y.o.c. 1995, working width 2200 mm,
with Maxon ValuePak 200 burners, high entry with slat opener/guider and
scroll rolls, steamer in entry and exit, double Santex Pads, feed take for
finish and chemicals, 2 cooling zones, inspection table with surface winder
and plaiter on exit.
1 x Caratsch Coating Range,
Width: 1500mm YOC: 1982 EL: 380/3/50, Oven with Kreulus infra-red heating
system, calender roller, cooling roller and exit to A-frame.
Sucker Muller Shearing Machine
Type FC 1 Year 1998, Single cylinder 2000mm on face.24 spirals., Comprising :
Entry with Bastian de batching unit type 106-01
High entrance gantry with E+L metal detector., One pair of E+L KF2020 edge
guiders,operator platform., Seam detector,fabric feed rollers,scroll rollers.,
Series 4000 display terminal with all control functions., Exit with high
gantry and a TSI pile height detector., Plaiter,Bastian "A" frame batcher.,
Dust extraction unit.
Operating voltage 400V/ 50Hz, 45A, This machine appears to be in excellent
condition and has recorded only 3408 hours on the “hours worked”meter.
1x open width washing machine WET-TEX year 1998,
type Wet-Wash 2/200, working width 2000 mm, Entry cloth guiding system, 4
washing compartment cloth content 60 meter, After each washing compartment
squeezing unit 2 cylinder WET-TEX OPTI-WETE20, Cylinder dryer WET-TEX type
WET-DRY 10 cylinders Teflon coated,
1 x Pad Steam dyeing unit,
High cloth entry J scray , with KÜSTERS dyeing padder type 222-11-1800, year
1977/1990, BABCOCK steamer type 5608-3600, year 1988, , FLEISSNER drumwashing
machine 5 comparments with squeezer,1977, 2 washing compertmnets FLEISSNER
1985 + 2 washing compartment GOLLER WD EFFECTA 1998, 3 x drumwashing
compartments FLEISSNER 1977,squeezing, WUMAG cylinder dryer with 24
cylinders,on exit cooling cylinder Fleissner, batching.with new switch panel
2005,
1 x steamer Arioli , year 1987,
200 meter cap. Heated steam and HT 180°C Thermic oil, 200 meter cap. Heated
steam and HAT 180 °C Thermic oil, Ww 260 cm,
2 x rope dyeing machines MCS type JR904DGL/R 1978,each
4 ropes 13450 liter, Control panel THIES T90 year 1996 .
1 x Calender Ramisch Kleinerwefers,
type RKK240, working width 180 cm, 2 cylinders, steel clinder dia 300 mm, 1
cotton cylinder 530 mm, dia,steam heated, Max. temp. 150 °C, press.30 ton,
speed 8 – 80 meter/min.
1x stenter Babcock , year 1988,
5 bays, gas heated, 180 cm, Entry Babcock padder 1988, Mahlo weft straihtener
1988, Pin chain, exit cooling zone and batcher
Used Krantz Stenter,
Maker : Kranz, Germany, Year : 1991, Roller width : 2,500 m/m, Working width :
max. 2,300 m/m, Termo oil heating, Pin type (vertical type), Nos. of chamber :
8 chambers, Control panel, Selvedge gumming, cutting and suction device, 3
bowl uncurler, PLC driving, 8 chambers body, 2 bowl padding mangle 10TON
EL feeler , Guide cloth roller, Plaiter , Cooling fan & 2 bowl cooling
cylinder : installed 2,000m/m additionally later as not originally equipped.
RAISING MACHINE LAFER
MODEL GR1-136E, ROLLER WIDTH 2000 MM, 36 CYLINDERS, PILE AND COUNTERPILE,
ENTRY WITH TENSION BARS AND CENTERER, SUCTION DEVICE, EXIT BY FOLDER WITH
STATIC ELECTRICITY ERASER. YEAR 2001. FULLY SUITABLE FOR KNITTING FABRICS.
SHEARING MACHINE BRAND LAFER
MODEL CMI-100, BLADES WIDTH 2200 MM, SCROLL, ROLLERS, SEAM AND METAL
DETECTORS, CENTERER, SELVEDGE OPENER STRIPES BEFORE SHEARING, LOOSE FIBERS
SUCTION DEVICE, COMPENSATOR, EXIT BY FOLDER WITH STATIC ELECTRICITY ERASER AND
ROLLER FOR A-FRAME. YEAR 2001. FULLY SUITABLE FOR KNITTING FABRICS.
CALENDER KUSTERS MODEL
212.50-2200, ROLLER WIDTH 2200 MM, TWO CYLINDERS (UPPER CYLINDER IN STEEL
HEATED BY THERMIC OIL AND LOWER CYLINDER SWIMMING WITH RACOLAN), HYDRAULIC
PRESSURE, HIGH ENTRY WITH TENSION BARS AND EXIT BY ROLLER FOR A-FRAME. SPARE
RACOLAN SLEEVE. YEAR 1980,
1 KUESTERS PADSTEAM, CONTINOUS DYEING, 100% COTTON,
FABRIC WEIGTH 200 - 490 GRS M2, USEFULL 1800MM WIDTH, PROZESSE: REACTIVE DYE
KKV, WASH ONLY, ROLL TO ROLL OPERATION, REWINDER HYDRAULIC CENTRAL TYPE, SPEED
MAX. 40 METERS, 7 WASH TANKS + PADDERS
STEAMER UNIT, NEW / NEVER USED WITH ALL DOCUMENTS AND ACCESORIES., WATER
RECYCLING SYSTEM,
1 Steam boiler, 1 ton steam per hour.
3 Washer side loader, each 400 Kg capacity.
1 Braun side loader washer extractor, 3 pockets with P.L.C. control, 180 kg
capacity.
1 Passat dryer 140 kg capacity.
4 Dryers 50 kg each type American laundry.
2 Extractor each 70 kg.
2 Atlas Copco screen commpresors
, yoc 1994 , 200 HP
1 HYDR. LARGE AREA DIE CUTTING MACHINE,
upstroke cutting machine for carpet, constr. "SCHÖN + SANDT", type
5050/250.160/250, year 2005, table 2500x1600 mm, table high 950 mm,
through-way 190 mm, traverse 15-165 mm, 2500 kN, greasing oil 200 l, weight
18000 Kg, hydr. group 2400 kN, closing speed 73 mm/s, press speed 5,4 mm/s,
back speed 82 mm/s, drive 22 Kw, hydr. oil capacity 650 l, 400 volt, 45 A, ±
25 Kw.
1 MAT MACHINE MOD. TURBOMAT ,
YOC.1994. Machine equipped with :
NR.2 NEW WOOD BONGOSSI CYLINDERS, TURBO BLOWING DEVICE, NR.2 CHANNELS FOUR
ROPES, MILLING BOXES, NEW ELECTRIC PLANT ,
NEW PNEUMATIC PLANT, D.C MOTORIZATION , SPARE PARTS FOR ONE YEAR WORKING
INCLUDED.
BULLMER machine type UNI 30/36 for layering
- all function /lifting, cuttting, etc/, complete equipment, width: 2 m, total
length: 15 m, Table consists of 6 parts
- 2,5 m each and can be folded to different length /on
2,5 m/. Excellent condition
MECA diving /swooping/ machine
- useful width: 1600 mm, additional spare parts inclding 5 cams, pneumatic
reeling for cotton wool + cocooner + winding device
KURIS PIONIER PROFESIONAL machine
for layerling for weaving fabric, complete, year 1997, including table 1,85 m
x 12 m /working area 10 m/ with many operation possibilities and platform for
transporting the opertor. Very good condition.
STUTZNACKER diving /swooping/ machine
for quilts, duvets, cover let, sleeping bags, dimensions 5m x 5,5m, quiet big
area of diving. Possibility to make a quilts dimension: 2000 x 2200
mm.Efficiency: 15 quilts/hour.
Device for jets linking
by using of ultrasound method. Very good condition.
BRUCKNER Fulard - complete,
working width: 2500 mm. Year 1984. Additional secondary main power engine moto
and another two boilers for preparing require wash.
1 pc. SANTEX tensionless dryer,
width: 2800 mm, y.o.c.: 1993
Caratsch Hotmelt Laminating Machine,
1700 mm w.w., 1900 mm Roll Width, Capable of Producing 3 Ply Laminate
(Requires 2 Passes)*, (2 Fabrics and a Foil in the Middle), Year:1995,
MONFORTS SECOND-HAND SHRINKAGE LINE
FOR PROCESSING WOVENS , Roller width: 2.000 mm , Maximum width of fabric
: 1.800 mm , Electric tension : 380V/50HZ , Entrance frame suitable for
feeling wovens in plaited form or on A-frames , Two drawing rollers , Steaming
chamber + heated roller , Clip tentering unit , Rubber belt compressive
shrinkage unit , Felt calender , Plaiter and winder , D.C. drive
Monforts Sanforising Line,
Roller width: 2.000 mm, Maximum width of fabric : 1.800 mm, Electric tension :
380V/50HZ, Entrance frame suitable for feeling wovens in plaited form or on
A-frames, Two drawing rollers, Steaming chamber + heated roller, Clip
tentering unit, Rubber belt compressive shrinkage unit, Felt calender, Plaiter
and winder, D.C. drive
01. SANDO / CHLORITE BLEACHING RANGE 1 SET,
YEAR: 1992 / 1988, ROLL WIDTH: 2,000 MM / 1,800 MM, MACHINE CONSISTS OF:
CLOTH ENTRANCE WITH TOYO TEXTAR, BRUSHING DEVICE, 2 CYLINDER DRYER, SAN-JET
GAS SINGEING MACHINE 2 BURNNER, 1 ORDINARY WASHER
STEAMING CISTERN, 2 HORIZONTAL WASHER WITH SQUEEZER, 2 ORIDINARY WASHER,
PLAITING-DOWN
1 ORDINARY WASHER,
PERBLE RANGE REACTION TOWER BY TITANIUM approx 6,000 M, TOYO TEXTAR, 1
SATURATOR WITH SQUEEZER, 3 HORIZONTAL WASHER WITH SQUEEZER, PLAITING-DOWN,
YEAR:1988,
2 ORDINARY WASHER WITH SQUEEZER,
PERBLE RANGE REACTION TOWER BY TITANIUM approx 6,000 M, TOYO TEXTAR, 1 OPEN
SOAPER WITH SQUEEZER
1 ORIDINARY WASHER WITH SQUEEZER, 3 HORIZONTAL WASHER WITH SQUEEZER, 36
CYLINDER DRYER, PLAITING-DOWN,
SANDO / MERCERIZING MACHINE 1 SET,
YEAR: 1993, ROLL WIDTH: 1,800 MM, MACHINE CONSISTS OF:, CLOTH ENTRANCE WITH
TOYO TEXTAR, 1 CHEMICAL PADDER, 12 TENSION CYLINDER, 1 CHEMICAL PADDER, 12
TENSION CYLINDER, 1 TON SQUEEZER, CLIP TENTER 24 M, 1 TON SQUEEZER
6 ORDINARY WASHER WITH SQUEEZER, 3 HORIZONTAL WASHER WITH SQUEEZER, 36
CYLINDER DRYER, PLAITING-DOWN,
SANDO / CONTINUOUS PAD STEAM DYEING MACHINE 2 SETS,
YEAR: 2000 / 1994, ROLL WIDTH: 1,800 MM, MACHINE CONSISTS OF:, CLOTH ENTRANCE
WITH CLOTH GUIDER, 1 DIPPING CISTERN, 3 TON PADDING MANGLE, 1 HORIZONTAL
STEAMER approx 50 M, 5 ORDINARY WASHER WITH SQUEEZER,
2 HORIZONTAL WASHER WITH SQUEEZER, 28 CYLINDER DRYER, 2 COOLING CYLINDER,
PLAITING-DOWN
KYOTO / THERMO FIX BAKING MACHINE 1 SET,
YEAR: 1996, ROLL WIDTH: 1,800 MM, MACHINE CONSISTS OF:, CLOTH ENTRANCE WITH
CLOTH GUIDER,
6 CYLINDER DRYER, BAKING MACHINE approx 150 M, 4 COOLING CYLINDER,
PLAITING-DOWN,
KYOTO / BAKING MACHINE 1 SET,
YEAR: 2004, ROLL WIDTH: 1,800 MM, MACHINE CONSISTS OF:, CLOTH ENTRANCE WITH
CLOTH GUIDER, 2 CYLINDER DRYER, BAKING MACHINE approx 200 M, 2 COOLING
CYLINDER, PLAITING-DOWN
SANDO / CONTINUOUS WASHING MACHINE 1 SET,
YEAR: 1998, ROLL WIDTH: 1,800 MM, MACHINE CONSISTS OF:, CLOTH ENTRANCE WITH
CLOTH GUIDER
5 ORDINARY WASHER WITH SQUEEZER, 24 CYLINDER DRYER, 3 COOLING CYLINDER,
BATCHING MOTION & PLAITING-DOWN,
WAKAYAMA / HEAT SET STENTER 1 SET,
YEAR: 1990, ROLL WIDTH: 1,800 MM, MACHINE CONSISTS OF:, CLOTH ENTRANCE WITH
TOYO TEXTAR, HI-FLEX PADDER, INFRARED DRYER 2 FACE, UNI HOT FLUE DRYER 1
CHAMBER, CLOTH ENTRANCE WITH CLOTH GUIDER, SEIREN WEFT STRAIGHTNER DM-BX?
PIN TENTER BY LPG 5 CHMABERR, ROLLER DRYER, 3 COOLING CYLINDER,
PLAITING-DOWN,
WAKAYAMA / HEAT SET STENTER 1 SET,
YEAR: 1996, ROLL WIDTH: 1,800 MM, MACHINE CONSISTS OF:, CLOTH ENTRANCE WITH
TOYO TEXTAR, 2 BOWL PADDER, INFRARED DRYER 2 FACE, ROLLER DRYER 1 CHAMBER,
PLAITING-DOWN, CLOTH ENTRANCE WITH CLOTH GUIDER, SEIREN WEFT STRAIGHTNER BUW,
PIN TENTER BY LPG 5 CHAMBER, BATCHING MOTION & PLAITING-DOWN
KOMATSUBARA / SANFORIZING MACHINE 1 SET,
YEAR: 1993, ROLL WIDTH: 1,800 MM, MACHINE CONSISTS OF:, CLOTH ENTRANCE WITH
CLOTH GUIDER
STEAMING CISTERN, SEIREN WEFT STRAIGHTNER CXW, SHRINKING RUBBER UNIT, FUELT
CALENDER, 2 COOLING CYLINDER, PLAITING-DOWN
OSHIMA / WET SUEDING MACHINE 1 SET,
YEAR: 2001, ROLL WIDTH: 2,100 MM,
WAKAYAMA / 3 BOWL CALENDER 1 SET,
YEAR: 1994, ROLL WIDTH: 1,800 MM, ROLL CONSISTS OF: COTTON + STEEL + COTTON,
PRESSUOR: BY PNEUMATIC,
KOMINAMI / INSPECTION PLAITER 1 SET,
ROLL WIDTH: 1,800 MM,
NAKASHIMA / INSPECTION WINDER TABLE TYPE 4 SETS,
ROLL WIDTH: 1,800 MM,
LOCAL / INSPECTION WINDER WITH J-SCRAY 8 SETS,
ROLL WIDTH: 1,800 MM,
TAI TONG / AUTOMATIC PACKING MACHINE WITH 2 ROPPING MACHINE,
ROLL WIDTH: 2,000 MM,
1 continuous bleaching machine Brugmann,
manuf. year 1989, 1 washing machine, padding machine with lye, J-Box, 2
washing machines
padding machine with acid, 1 washing machine, padding machine with
demineralizing, J-Box, 1 washing machine, padding machine with hydrogen
peroxide, 2 washing machines, With mangle Brugman, yoc 1992, working width
2200mm
1 x BRUECKNER STENTER, 1983,
Working width 2200 mm, 2 chambers, steam heated, vertical pin chain, exit
plaiter or A-Frame,
1x KLEINEWEFERS COLD PAD BATCH, 1986,
Roller width 2200 mm, max. fabric width 2000 mm, min. fabric width 1400 mm,
speed range 7-70 m/min. power required 9 kw, Electric data 380/50, max.
pneumatic pressure 7 bar, water pressure 2 bar , Entry frame consists of
guide rollers, bars, and pendulum guide rollers, 2 roller BICOFLEX pad mangle,
Base frame includes lifting and lowering device for trough., Winding system, 8
perforated washing beams on A-frame carriages
2 1000 litre s/steel tanks with agitators, 2 250 lite s/steel tanks with
agitators, 2 component dosing system 1:4 ratio mixing pumps 20 litre/min.
dosing,
Machine is in very good working condition and still fully installed but
available at short notice,
1 x EVAC VACUUM STATION, 1995,
suitable for Stenter or Washing Installations, consisting of: 3 x Vacuum
slots width 2000 mm, 1 x Vacuum pump + 1 spare, 1 x Separator Unit
1 - Used ARTOS Stenter,
4 chambers, 2300 mm working width, thermo oil heated, horizontal pin chain,
padder, MAHLO straightner RFMC 74N, selvedge gluing and trimming device,
automatic winder, plaiter, PLEVA Autopilot PLC control, y.o.c.: 1969,
completely rebuilt and upgraded in 1999 by Babcock and Pleva.
NO. 2 Raising machines Make Lafer,
Perfect like new , (1) model GRI-124/C, (1) model GRI- 124/T , working width
2200, year 2003. with Exhaust fan and pipe connections for the fluff, 24
cylinders , machine can work in tandem, or can buy separately, touch screen
display, Machines in perfect conditions, few hours working only
1 shearing machine
Mario Crosta type SSC/A, yoc 1998, working width 2000mm,
1 Set Monforts Stenter ,
6 chamber , -Width: 200cm , -Year: 1990, With Menzel Weft straightner
1 set Ramisch Kleinewefers
RKK-360 Calender ,Year: 1993
1 set Santex Tensionless driver ,
Width: 2800mm ,Years: 1993
1 set Monforts Shrinkage Machine
, Width: 2000mm , Year: 1990,
1 set Morrison Shrinkage Machine
, Year 1990, Width: 180cm, Felt unit: Φ1.6m
1 set STORK Coating Machine,
Model C T-Ⅴ , Year: 1997
1 washing machine COSMOTEX model LA-150,
swiveling, steam heating, capacity 150 Kg, drum diam. 1.495 mm, drum depth 920
mm.
1 dryer COSMOTEX model S-85-J, swiveling,
steam heating, capacity 85 Kg, drum diam. 1.400 mm, drum depth 1.075 mm.
1 hydroextractor COSMOTEX model HE-75,
with frequency inverter, capacity 75 Kg, drum diam. 1.000 mm, drum depth 460
mm.
1 dryer TORLS, steam heating, capacity 100 Kg,
drum diam. 1.500 mm, drum depth 1.150 mm
1 COSMOTEX
fabric opener and inspection table.
1 KUESTERS PADSTEAM, CONTINOUS DYEING, 100% COTTON,
FABRIC WEIGTH 200 - 490 GRS M2, USEFULL 1800MM WIDTH PROZESSE: REACTIVE DYE
KKV, WASH ONLY ROLL TO ROLL OPERATION, REWINDER HYDRAULIC CENTRAL TYPE , SPEED
MAX. 40 METERS, 7 WASH TANKS + PADDERS
STEAMER UNIT, NEW / NEVER USED WITH ALL DOCUMENTS AND ACCESORIES., WATER
RECYCLING SYSTEM,
Used Krantz Stenter,
Maker : Kranz, Germany, Year : 1991, Roller width : 2,500 m/m, Working width :
max. 2,300 m/m, Termo oil heating, Pin type (vertical type), Nos. of chamber :
8 chambers, Control panel, Selvedge gumming, cutting and suction device, 3
bowl uncurler, PLC driving, 8 chambers body, 2 bowl padding mangle 10TON
Guide cloth roller, Plaiter, Cooling fan & 2 bowl cooling cylinder : installed
2,000m/m additionally, later as not originally equipped.
1 BOEWE model P-564 industrial textile dry cleaning machine,
capacity max. 32 Kg, heating high pressure steam, power supply 400 V - 3 ph -
50 Hz, yoc. 1994, but completely overhauled and updated by the manufacturer in
2001.
1 steam generator ATTSU mod.
RL-500/7, yoc. 1999, production 500 Kg steam/hour.
Used Gas Yarn Singeing Machine,
Maker: RITE, Italy., Yoc: 1996 years., Model: GRR-N., Nos,of drums: 80 drums.
With overhead cleaner., Complete set with standard accessories.
1 Friction Calander,
RAMISCH, RK 360, no. 63235, 3-rollers, 170 cms wide, made in 1964, 30 tons
hydraulic pressure, top steel rollers, center cotton roller, bottom steel
roller, gas-heated, steel rollers 30 cms. dia., cotton roller 60 cms. dia.,
gear motor , 11, 4 kw - 50 kw, friction up to 200 %,
1 Calender, KLEINEWEFERS,
type K 50/2, made in 1973, 50 tons pressure, 175 cms roller width, 2 rollers:
upper steel roller chromed, 34 cms dia, thermooil-heated, lower racolan roller
50 cms dia., steamheated, large batching system, winding and unwinding device,
control cabinet, metal guard, thermooil boiler HTT, made in 1985, no.
8.1.1016, 82 kw, type WTO 7
1 Calender,
KUSTERS, Type 122/1600, 160 cm working width, 2 rollers: upper roller steam
heated, bottom Racolan-roller S-Walze, overholed in 1986,
1 Calender,
AIGLE, 2 steel rollers, 340 cm roller width,
1 Racolan Sleeve,
Length 260 cm, outer dia. 42,5 cm, inner dia.: 33 cm, thickness 4,75 cm,
1 Racolan sleeve,
Length 167 cm, outer dia. 28,5 cm, inner dia.: 19 cm, thickness 4,75 cm,
1 Chintz Calender,
ECK HAUBOLD, 3 rollers, upper and bottom chromium-plated steel roller,
steam-heated, centre paper roller, 60 tons hydraulic pressure, 180 cm roller
width, 0-40 m/min. speed, reconstructed with PIV-drive to friction and ca. 200
%, oilhydraulic winder with cloth storage, 10 m capacity, in 2001 generally
re-conditioned.
1 Roll- and Smoothing Calender with 3 rollers,
KLEINEWEFERS, Model K 60/3, made in 1969, Roller width 210 cm, Steel roller
335 mm, Cotton roller 530 mm, Steel roller 335 mm, 50 tons working pressure,
1 Calander
FARMER NORTON, made in 1980, 5 bowls made of steel, polyamide and paper,
capacity of up to 20 tons, 75 kW, 380 Volt, 3 phases, speed: 12-59 m/min.,
cloth width: 200 cm,
1 Calander
RAMISCH/KLEINEWEFERS, Nipco L, YOC 1991/1998, 200 cm working width, 3 rollers:
upper roller electr. heated, bottom roller Racolan, Cotton Roll, 60 t
hydraulic pressure, WEKO humidifier, metal detector, cooling rollers, big
batcher,
2 Embossing Calanders
HUTTEN, YOC 1962, 170/180 cm roller width, upper steel embossing roller,
bottom rubber/resp. cotton roller, including 30 further embossing rollers with
various designs
1 Calander,
KUSTERS, YOC 1982, Type 212.3000, 300 cm working width, with steel roller and
racolan roller, steel roller gas-heated, big batcher
1 Calendar
KLEINEWEFERS, 4 rollers, made in 1961, 180 cm roller width, rollers: steel
steam-heated, paper, cotton, steel steam- heated, hydraulic pressure
1 Stentering Limit,
MONFORTS, 180 cm wide, 120 cm long, with clip chain, made in approx. 1980,
completely overhauled in 2006
1 Stenter
AIR INDUSTRIE, Type compact air, made in 1982/88, 300 cm working width, with
Foulard, needle chain, 6 bays, gas heated, 3 weft straighteners in different
widths, Foulard with 2 chassis, PERMASET control system, needle chain,
finishing inserts made of stainless-steel, approx. 1000 litres with mixer and
pump, steaming bay in inlet, cooling bay in outlet, cutting device, bit
batcher, CO² distinguishing system, The stenter was changed from 3 to 6 bays
in 1988, gas heated, unit is complete incl. The needed electronic controls,
accelerators and installations
1 Stenter,
BRUCKNER VN, made in 1980, 6 bays, 180cm WW, vertical pin chain, with: foulard
KÜSTERS 222-52-1800, made in 1986, weft straightener MAHLO RFMC-94H11, made in
1994, tower washer MENZEL, made in 1982, including roller , vat and
intermediate squeezer, steam chest, outlet for batching with peripherical
winding.
1 Straightening Stenter
TEXTIMA, type 6595, 240 cm working width, YOC 1986
1 Stenter
STENTEX/MOENUS, type Stentotherm 3300, YOC 1996, working with up to 180 cm, 9
bays, gas
1 Stenter
BABCOCK, YOC 1993, 5 chambers, gas fired, drying and heat-treatment stenter
with horizontal pin and clip chains for woven fabrics, Fabric width max. 260
cm, speed max. 80 m/min., scray accumulator entry, BIANCO fabric guiding, HUNT
& MOSCROP vertical pad mangle, swim roller, width 280 cm system KÜSTERS, YOC
1960, Optitexma AB, Optivac vacuum extraction, 7 MATHER & Platt Steam
cylinders vertical, BIANCO automatic weft straightener DIGITEX with optical
reading system for woven and knitted fabrics 280 cm wide Year 1993, roller
accumulator (fabric capacity 60 m), descending batch winder and plaiter, The
machine was used to dry cotton/polycotton, pigment pad, finish furnishing and
bedding fabrics.
1 Stenter BABCOCK,
180 cm wide, 5 bays, YOC 1988, needle chain, gas heated, MAHLO weft
straightener, BABKOCK Foulard,
1 Stenter for drying and thermofixing,
BRUCKNER/SABEN, YOC 1992, 240 cm wide, vertical pin chain, automatic
over-feed, MAHLO Permaset, 8 chambers, oil heated, selvedge cutters, cooling
unit, TEPA vacuum extractor, TEPA Foulard, 240 cm wide, BIANCO weft
straightener, outlet with big batcher and plaiter
1 Stenter
BRUCKNER, Type VNL 18/7, YOC 1984, 180 cm working width, high inlet, 7 bays,
feeder ERHARDT & LEIMER, KLEINEWEFERS Foulard, steam/gas heating, outlet with
cooling zone, plaiter, big batcher,
1 Levelling stenter,
ARTOS, Type 5021/1/180, YOC 1974, max. working width 180 cm, speed max.
125m/min., with inlet and outlet combination, inlet combination with feeder,
pneumatic compensating roller and feeding frame, compensating roller and
drawing roller, horizontal chain
1 Stenter
KRANTZ, type K30, made in 1999, speed 3-30 m/min., 2 bays, 160 cm working
width, vertical pin chain, with foulard KÜSTERS type 225.99/1800, made in
1983. The machine is heated with hot water up to 100°C but can be modified to
be heated with thermic oil instead. The control has been upgraded in 2006.
1 Stenter
BRUCKNER, 320 cm wide, YOC 1997, 5 bays, KUSTERS Foulard YOC 1993, gas heated,
horizontal needle chain, 2 KUSTERS washing compartments, 1 pre-dryer TICHY
1 Stenter
BRUCKNER, YOC 1986, 180 cm wide, pin/clip chain, 4 bays, gas heated, with
two-roller foulard BIANCO, BIANCO weft straightener, cooling zone, big
batcher, plaiter,
1 Stenter
BRUCKNER, YOC 1988, 4 bays, gas heated, 320 cm working width, pin-clip chain,
with BIANCO weft straightener year 1990, Foulard GOLLER year 1994, with
coating unit, roller knife 240 cm wide
1 Stenter
BRUCKNER, YOC 1988, 390 cm wide, pin-clip chain, 4 bays, gas heated, with
BIANCO straightener year 1998, KÜSTERS Foulard 320 cm wide year 1988, cooling
zone, big batcher, plaiter,
1 Stenter for Woven and Knitted Fabrics
BRUCKNER, 3,40 m wide, 4 bays, oil heating, pin/clip chain, 2 foulards
KÜSTERS, 1 x 1,80 m wide type 225.25, 1 x 3,40 m wide type 222.53, made in
1976 and 1975. The stenter has an entry zone of 5,50 m, with steaming device,
gluing device, cutting device, cooling zone, plaiter.
1 Stenter for Woven and Knitted Fabrics,
ARTOS, 310cmwide, 6 bays, thermo oil heating, pin/clip chain, entry zone 5,50
m, outlet with plaiter and winder, foulard ARTOS 5805, made in 1973, 2
rollers, sloping position, manual weft straightener, selvedge gluing, selvedge
cutting, centre cutting.
1 4-Bay Duplex Stentering And Dyeing Frame
ARTOS, made in 1986, steam-heated, ARTOS-MAHLO weft straightener, cloth width
up to 1600 mm, optic one needle control E&L, big batcher, plaiter, pin chain,
inlet
frame with pneumataic ERHARDT & LEIMER spreaders , type KF 2020, outlet with
plaiter and batch winder,
Fully Reconditioned Gas Singeing Machine,
Maker: Osthoff, Germany., Yoc: 1997 year, Model: VP77/1., Burner width: 2,000
mm., Working width:1,900 mm.
Usage: cotton, T/C., with standard accessories., Consisted of following
parts., -- cloth guide., -- 2 nos x burner., -- 1 nos x brush box., -- exhaust
fan., -- plaiter.
-- control panel.
1 - Used Kemco Direct-Contact Hot Water System, installed new in 1999,
complete with 21 million BTU double burners, 30,000 gallons per hour capacity,
2 x 60 H.P. pumps, hot water S.S. storage tank with 20,000 gallons capacity.
Also, together with above or separately, 1 - Used Kemco Heat Reclaimer (Heat
Exchanger) stainless steel bundle, 30,000 gallons per hour capacity. Quick
payback from reduced energy costs and increased production.
THERMOSOL BRUCKNER,
YEAR 1992, ROLL WIDTH 1800mm
THERMOSOL BRUCKNER,
YEAR 1991, ROLL WIDTH 70”,
MONFORTS SANFORIZE,
YEAR 1990, WIDTH 1800mm, MINI STENTER, SHRINK AGGREGATE,
KRANTZ STENTER ,
YEAR 1990, ROLLER WIDTH: 3000 MM., WORKING WIDTH: 2800 MM., PIN CHAIN , THERMO
OIL HEATING
5 CHAMBERS, CONSISTS OF: CLOTH ROLLER, 2 BOWL PADDING MANGLE, PLAITER,
CONTROL PANEL, INCLUDE 2 CAUSTIC SODA TANK, CAN BE SEEN RUNNING ON MILL FLOOR
1 OSTHOFF fabric singeing machine type ST 80,
year 1987, roller width 220 cm, working width 200 cm, high entry, beating and
brushing unit
2 burner double jet singeing machine, beating and brushing machine, desizing
box, squeezing foulard, big batch winder exit, machine with filter and dust
extraction
OMEZ spreading padder with 3 cylinders – table w. : 2000 mm,
Modified with frequency variator, ERHARDT-LEIMER KF1020 yarn center,,
Preparation kitchen, agitators and pumps. Recently reconditionned,
CALENDER MACHINE,
year 2000, Fully recondisioned on 2007, name of manuf. : Ssang Yong machinery,
Korea, working width : 1800mm, working speed : 5~100 meter/min., number of
bowl : 3 nos., Hydraulic pressure : max. 50 ton, Temperature : Max. 200 (steel
surface), Electricity : 220 Volts x 3 Phase, electriccity consumption : 60 KW,
3bowl calender machine, the merit are that don't take place the damaged marks
unless same place between upper roll and bottom roll occuring them and we can
get the speeding up of the machine.
Fully Reconditioned Gas Singeing Machine.,
Maker: Osthoff, Germany., Yoc: 1997 years., Model: VP77/1., Burner width:
2,000 mm., Working width:1,900 mm.
Usage: cotton, T/C., with standard accessories., Consisted of following
parts., -- cloth guide., -- 2 nos x burner., -- 1 nos x brush box., -- exhaust
fan., -- plaiter., -- control panel.
ARIOLI Steaming machine
Type MIN Yoc 1989, Width 3200mm, saturated vapour 102°C - superheating
175°C
Krantz stentering machine type K10 - year 1985
- 4 chambers - working width 2400mm , without cupboard and control boards,
Krantz padding mangles Year 1985
- working width 2400mm ( good condition),
Hemmer Open-width washing machine Year 1985
- working width 1800mm,
1 XORELLA Steaming machine Type NPK-G Yoc 1981,
Width 1700mm - saturated vapour 102°C - superheating 175°C,
Used Fararo Knit Tube Compactor,
Maker: Fararo, Italy., Yoc: 1994 years, Roller width: 60 inch., consisted of
following parts., -- ebtrance., -- Guide & heating parts.
-- Folding part., -- electric control parts.
1 x CARATSCH COATING LINE, 1982,
working width 150 cm, oven with Kreulus infrared, heating system, calendar
rolling, cooling roller and exit, to A - frame
CALENDER KUSTERS,
ROLLER WIDTH 3200 MM, 5 CYLINDERS. LOWER OF RACOLAN + STEEL + 3 COTTON.
PRESSURE WATCH 250 BAR, ANOTHER 10 BAR, EXIT FOR A-FRAME. YEAR 1977.
PAD STEAM FOR BLEACHING COTTON BRAND BENNINGER,
WORKING WIDTH 1800 MM, 4 IMPREGNATION TANKS MOD. BENNINGER EXTRACTA, STEAMER
OF 3 CHAMBERS WITH DOUBLE PASSAGE CYLINDRES (CLOTH CONTENT 150 M), WASHING
RANGE BENNINGER EXTRACTA OF 4 TANKS, DRYER OF 24 DRUMS, EXIT BY J BOX AND
ROLLER FOR A-FRAME. YEAR 1983.
OPEN WIDTH COMPACTOR SPEROTTO
TYPE COMPACTA CK/240, WORKING WIDTH 2200 MM. PRE TENSION ENTRY WITH CORINO
CENTERALISING GUIDER PIN FEED STENTER FRAME WITH OVERFEED STEAMING FELT
COMPACTOR TAKE OFF BY ROLLING MACHINE. WITH ANTI STATIC AND CUTTING DEVICE.
YEAR 1995. NEW FELT BLANKET IN 2006.
Calander Kleineweferst type RKK340,
3 rollers (2 steel rollers dia. 400mm and 410mm, one roller dia. 560mm with
cotton covering), electrical heating, max. power of burners: 115 kW. Work.
width 2400mm.
BRUCKNER STENTER.YEAR 1986,Pin/Clip
chain. 2000mm Working Width.6 chambers,Gas fired., Comprising:
Entrance gantry with Bianco centring& guiding system., Bruckner 2 bowl padding
mangle.Mahlo weft straightener., Operator platform,stenter entry 4.5mts with
photocell
edge guiding,overfeed,pinning on brushes,steaming unit., Exit zone 3mts with
cooling unit,”A”frame batcher & plaiter., This machine is still erected in the
factory,not in use but can be test run if required.
CALENDER make KUSTERS, year 1979,
5 bowls ( cotton and steel ), working width 3000 mm, exit with A-frame,
complet entry, hydraulic pressure, the machine is working without heating ( it
is necessary install some type of heating ), in working condition.
NO. 1 BENNINGER Open width bleaching range with pad steam unit composed of:
4 boxes + 3 steaming units + 4 boxes + 24 drums of 650 mm diam. dryer cougle
tower, yoc 1982 updated and refurbished on 2002, nominal width 2.000 mm,
useful width 1800mm
1 THERMOSOL dyeing line composed with
KUSTER padder, Infrared field by FLEISSNER and, Hot Flue by ARTOS, nominal
width 2.000 mm, useful width 1.800 mm
line original of 1982 refurbished and updated in 2002
1 Sanforizing line made by MONFORTS,
1972 refurbished on 2000, nominal width 2.000 mm, with infeed device, compact
rubber device, chain tenter, palmer dryer
1 Sanforizing line made by MONFORTS,
1974 refurbished on 2000 , nominal width 2.200 mm, with infeed device, compact
rubber device, chain tenter, palmer dryer
Compacting machine for tubular knit fabric,
SANTEX made, Type: SANTASPREAD 140, 1996 years, working width: 1400 mm.
OPEN WIDTH COMPACTOR,
Brand Name: MUZZI, 1995 Years, Rubber blanket total power 10 kw dc motor, With
speed control and heat control., Machine has pressure heats watch.
2 Dyeing & Bleaching machine, 98°C, 1000 kg,
Unitex 4000 PC control, make: SCHOLL,
1 Stenter, 4 chambers, gas heated, horizontal pin
chain, padder, MAHLO straightner RFMC 74N, selvedge gluing and trimming
device, automatic winder, plaiter, PLEVA control, make: BABCOCK / ARTOS,
working width: 2300 mm, y.o.c.: 1983
2 Stenter, 6 chambers, gas heated, horizontal pin
chain, padder, MAHLO straightner RFMC 74N/94N, selvedge gluing and trimming
device, automatic winder, plaiter, PLEVA Autopilot control, complete revised
2002, make: BABCOCK / ARTOS, working width: 2200 mm, y.o.c.: 1984,
1 MAGEBA/BENZ "HOTFLUE" line,
working width 500 mm, consisting of : unrolling device, padder, predryer
MAGEBA 32 - 5005 - 24 yoc 1992, hotflue BENZ type BFK, 25 M/E yoc 1985.
1 MAGEBA "padsteam" for ribbons or for laboratory, yoc 1987,
working width 200 mm, consisting of : unroller, padder, steamager, padder,
washing machine 2 compartments each with squeezing padder, final padder, 1
drying cylinder.
BATCH DECATISING KD FITE TYPE AQ,
ROLLER WIDTH 2000 MM, WORKING WIDTH 1800 MM, WITH ROTARY DRUM OF THREE
POSITIONS, ø OF EACH BEAM 450 MM, LOADING CAPACITY 300 M OF FABRIC EACH ONE,
WITH CONVEYOR 320 M. YEAR 1985.
1 Kusters 3-Stage Open Width Bleach Range 1993,
80" Roll Face, 135 Yards/Minute Maximum Throughput, To Include:
(1)
Bastian Model 09020/2000 Surface- Type Unwind Stand, (1993); Cradle Type; with
Roll Staging Table, with Hydraulic Lift/Rol1 Dump; and Merrow Model 70-D3B-2
Butt Seamer,
(1) Kusters Beater Roll Stand; Overhead, Nip Roll Driven; with Specially
Manufactured J-Box, Accumulation Scray
(1) Osthoff-Seng Model PK93 Singer(1994); 2-Head, Natural Gas Fired; , with
Specially Manufactured Stock , Infeed Stand,
with (2) E&L Model KF-2020 Edge Guides;
and Control Panel
(2) Kusters Model 235.03 Saturation Boxes, (1994); Heated, Stainless Steel,
Nip Roll Driven; Each with Infeed Nip Roll
Drive; and Overhead Exit Drive
(2) Kusters Model 235.46 Wash Boxes, (1994); Stainless Steel, Heated,
Estimated 10-Pass; Each with Press- Type Exit Nip
Roll, with Water Sealing Bar; and Box Control
(1) Kusters/EVAC Vacuum Aspirator, (1994); with Cross Range Vacuum Head;
Filter Unit; and Enclosed Vacuum Pump
(1) Kusters Saturation Box; Stainless Steel, Heated, 4-Pass; with Press- Type
Exit Nip Roll, 5 Ton, with Water Sealing Bar;
and Box Control
(1) Kusters Model 247.12 Roll Bed Steamer, (1994); 45' Overall Roller Bed
Length,Stainless Steel; with 30-Yard
Accumulation and Pre-Heat Section; Overhead Re- Tensioning and Outfeed
Section; and Steamer Control
(4) Kusters Model 235.46 Wash Boxes, (1994); Stainless Steel, Heated,
Estimated 6-Pass; Each with Press- Type Exit Nip
Roll, with Water Sealing Bar; and Box Control
(1) Kusters Evac Vacuum Aspirator, (1994); with Cross Range Vacuum Head;
Filter Unit; and Enclosed Vacuum Pump
(1) Kusters Saturation Box, (1994); Stainless Steel, Heated, 4-pass; with
Press- Type Exit Nip Roll, 5 Ton, with Water Sealing
Bar; and Box Control
(1) Kusters Model 272.15 1800 Fabric Tensioning and Straightening Stand,
(1993); Overhead Feed; with Powered Exit Nip
Roll
(1) Kusters Roll Bed Steamer; Stainless Steel, 45' Roll Bed Length; with
300-Yard Accumulated Length Tight Strand Pre-Heat Section; Associated Fabric
Drives;
Bianco Exit Fabric Straightener, with Control; and Nip Roll Exit Stand, with
Water Sealing Bar
(3) Kusters Model 235.46 Wash Boxes(1994); Stainless Steel, Heated, Estimated
6-Pass; Each with Press- Type Exit Nip Roll,
with Water Sealing Bar; and Box Control
(1) Kusters Saturation Box, (1994); Stainless Steel, Heated, 4-Pass; with
Press- Type Exit Nip Roll, 5 Ton, with Water Sealing
Bar; and Box Control
(1) Kusters Model 235.46 Wash Box, (1994); Stainless Steel, Heated, Estimated
6-Pass; with Press- Type Exit Nip Roll, with
Water Sealing Bar; and Box Control
(1) Kusters EVAC Vacuum Aspirator, (1994); with Cross Range Vacuum Head;
Filter Unit; and Enclosed Vacuum Pump
(1) Kusters 20-Can Drying Section; Steam Fired, 80" Face Width, 30" Can
Diameter, (2) Stacks of (10) Cans; with Infeed
Tensioning Rolls; Outfeed Tensioning Rolls; Safety Enclosure; Associated
Mezzanine; and Section Control Stand
(1) Kusters Specially Manufactured J-Box Accumulation Scray; with Pull- Type
Nip Roll Infeed; Menzel In-Line Inspection
Table, 80" Face Width; and Mahlo Model EMC-9R Range Moisture and Speed
Monitor, with (3) Measurement Heads, and
Programmable Logic Control
(1) Bastian Model 15003.03011/2000 Rewind Stand, (1993); A-Frame Rewind Type;
with (2) E&L Model KF2020 Infeed
Edge Guides; Overhead Hold-Down Rewind Arm,
Hydraulically Actuated; and Stand Control
(1) Lot of Associated Process Piping; Duct Work; and Electrical Conduit
(1) Master Bleach Range Control Stand
1 Küsters 2-Stage Open Width Bleach Range 1993-4,
80" Roll Face, 135 Yards/Minute Maximum Throughput, To Include:
(1) Bastian Model 09020/2000 Unwind , Stand, (1993); Single Roll, Cradle Type;
with Roll Staging Table, with Hydraulic Lift/Rol1 Dump; and Merrow Model
70-D3B-2 Butt Seamer, with (2) E&L Model KF-2020 Edge Guides; and Control
Panel
(1) Kusters Model 235.03 Saturation Boxes, (1994); Heated, Stainless Steel,
Nip Roll Driven; Each with Infeed Nip Roll Drive; and Overhead Exit Drive
(1) Kusters Model 235.46 Wash Boxes, (1994); Stainless Steel, Heated,
Estimated 10-Pass; Each with Press- Type Exit Nip Roll, with Water Sealing
Bar; and Box Control
(1) Kusters Evac Vacuum Aspirator, (1994); with Cross Range Vacuum Head;
Filter Unit; and Enclosed Vacuum Pump
(1) Kusters Saturation Box, Stainless Steel, Heated, 4-Pass; with Press- Type
Exit Nip Roll, 5 Ton, with Water Sealing Bar; and Box Control
(1) Kusters Model 272.15/1800 Fabric Tensioning and Straightening Stand,
(1993); Overhead Feed; with Powered Exit Nip Roll
(1) Kusters Roll Bed Steamer; Stainless Steel, 45' Roll Bed Length; with
300-Yard Accumulated Length Tight Strand Pre-Heat Section; Associated Fabric
Drives; Bianco Exit Fabric Straightener, with Control; and Nip Roll Exit
Stand, with Water Sealing Bar
(1) Kusters Model 235.04 Saturation Box, (1994); Stainless Steel, Heated,
4-Pass; with Press-Type Exit Nip Roll, 5 Ton, with Water Sealing Bar; and Box
Control
(1) Kusters Model 235.46 Wash Box, (1994); Stainless Steel, Heated, Estimated
6-Pass; with Press- Type Exit Nip Roll, with Water Sealing Bar; and Box
Control
(1) Kusters 20-Can Drying Section; Steam Fired, 80" Face Width; 30" Can
Diameter, (2) Stacks of (10) Cans; with Infeed Tensioning Rolls; Outfeed
Tensioning Rolls; Safety Enclosure; Associated Mezzanine; and Section Control
Stand
(1) Kusters Specially Manufactured J-Box Accumulation Scray; with Pull- Type
Nip Roll Infeed; Menzel In-Line Inspection Table, 80" Face Width; and Range
Moisture and Speed Monitor , with (3) Measurement Heads, and Programmable
Logic Control
(1) Bastian Model 15003.03011/200 Rewind Stand, (1993); A-Frame Rewind Type;
with (2) E&L Model KF2020 Infeed Edge Guides; Overhead Hold-Down Rewind Arm,
Hydraulically Actuated; and Stand Control
(1) Lot of Associated Process Piping; Duct Work; and Electrical Conduit
(1) Master Bleach Range Control Stand
1 Küsters Tandem Mercerizer; (1993-4); 80"
Roll Face, 135 Feet/Minute Maximum, Throughput, To Include:
(1) Bastian Specially Manufactured , Infeed Stand; with Tensioning Rolls;
Merrow Model 70-D3B-2 Butt Seamer, Railway, Nip Roll; J-Box Accumulation
Scray; and (2) E&L Model KF-2020 Edge Guides
(2) Küsters Saturation Boxes; Stainless Steel, Heated, 4-Pass; Each with
Press- Type Exit Nip, Roll, with Water Sealing Bar; and Box Control,
(1) Küsters 12-Can Timing and Accumulation Stand; 80" Face Width, 24" Can
Diameter, (2) Stacks of (6) Cans; with Infeed and Outfeed Tensioning Rolls;
Associated Mezzanine; and Control
(1) Marshall & Williams Model 5512 Clamp- Type, stenter Frame, Adjustable
Width, 80" Maximum Fabric Width, 100' Overall Run; with Infeed Fabric Guides;
(8) Cascade Rinse/Vacuum, Aspiration Stands, Each with 15 hp Aspiration Pump;
and Pull- Through Drive Outfeed Stand
(1) Kusters Model 957.15 Festoon Accumulator/Tensioner, (1994); 3-Pass, Chain
Driven
(1) Kusters Model 235.30 8-Pass Recuperator, (1994); Stainless Steel, Heated;
with Press- Type Exit Nip Roll, with Water Sealing Bar; and Box Control
(2) Kusters Model 235.09 Wash Boxes, (1993); Stainless Steel, Heated, 5-Pass;
Each with Press- Type Exit Nip Roll, with Water Sealing Bar; and Box Control
(1) Kusters Model 247.12 Saturation Box, (1994); Stainless Steel, Heated,
4-Pass; with Press- Type Exit Nip Roll, with Water Sealing Bar; and Box
Control
(1) Kusters Model 235.09 Wash Box, (1993); Stainless Steel, Heated, 5-Pass;
with Press- Type Exit Nip Roll, with Water Sealing Bar; and Box Control
(1) Kusters EVAC Vacuum Aspirator, with Cross Range Aspiration Head; Filter
Stand; and Enclosed Vacuum Pump
(1) Mahlo Model RFMC-94H 2-Stage Pattern, Straightener, (1993); with (2) Bow
Rolls; (3) Skew Rolls; and Control
(1) Kusters 20-Can Drying Section; Steam Fired, 80" Face Width, 30" Can
Diameter, (2) Stacks of (10) Cans; with Infeed and Outfeed Tensioning Rolls;
Associated Mezzanine; Safety Enclosure; and, Dryer Control
(1) Menzel Inspection Station; 80" Face Width; with Nip- Type Drive Rolls;
j-Box Accumulation Scray; Inspection Table; and Mahlo Model EMC-9,
Moisture/Range Speed Monitor, with PLC Control
(1) Bastian Model 15003.030111200 Rewind Stand, (1993); A-Frame Rewind Type;
with (2) K&L Model KF-2020 Edge Guides; Overhead Hold-Down Rewind Arm; and
Stand Control,
(1) Menzel Model 80US 80" Portable Rewind Cradle, (1995); Cradle Type; with
Unload Table
(1) Lot of Miscellaneous Process Piping; Electrical, Conduit; and Ductwork
(1) Master Mercerizing Range Control Station
1 Mario Crosta 6-Roll Fabric Sander; 80"
Roll Face
(1) Specially Manufactured Cloth Infeed Stand; A- Frame Type; with Merrow
Model 70-D3B-2 Butt Seamer, Railway, Overhead Nip Roll Drive; J-Box
Accumulation Scray, with Tensioning Roll; and Guide Roll Stand, with (2)
Guider Model 45 Edge Guides
(1) Mario Crosta 6-Roll Fabric Sanding Unit; 80" Maximum Fabric Width; with
(7) Tensioning Heads; (5) Sanding Rolls; Brush Roll; Automatic Seam Jumping;
Sanded Fabric Chaff Collector, with 10 hp Stand-Mounted Vacuum Blower; and 4-
Bag Dust Collector
(1) Kalin Model V11R Finishing Vacuum Pump/Blower, (2001); Dual Head, Overhead
Mounted; with Estimated 7-1/2 hp Vacuum Blower; Menzel 2-Cell Dust Collection
Stand; and Control
(1) Specially Manufactured Inspection Board; Back Lit, 80" Maximum Fabric
Width; with Overhead Lighting; and Nip- Type Drive Roll
(1) Specially Manufactured A-Frame Type Rewind Stand; with Infeed Roll; and
Overarm A-Frame Rewinding Roll
1 Kusters Gas-Fired Calender, (1993);
80" Roll Width Capacity, 100 Feet/Minute Maximum Throughput, To Include:
(1) Kusters Cloth Infeed Stand; with E&L Static Elimination Bar; Infeed Rolls;
Roll- Type Linear Foot Counter; and
(2) E&L Model KF-2020 Edge Guides
(1) Kusters Model 213.40-1800 Gas-Fired Calender, (1994); 80" Roll Face Width;
with 3-Roll Pretensioning Stand;
(2) Nylon-Coated Press Rolls; Chrome Finished Heating Roll, Natural Gas Fired;
Overhead Tensioning Rolls; and Control Stand
(1) In-Line Metal Detector
(1) Bastian Model 0301112000 A-Frame Rewind Stand, (1993); 80" Roll Width
Capacity; with Overarm Hold-Down Rewind Arm; and Control
1 Monforts Finishing Range, (1993); 80"
Roll Face 120 Yards/Minute Maximum Throughput, To Include:
(1) Monforts Model E.+A. Kombi A-Frame Type Infeed Stand, SIN 65936, (1993);
with Powered Overhead Infeed Roll; J-Box Accumulation Scray, with Digital
Linear Foot Counter; Tensioning Stand; and (2) E&L Model KF-2020 Edge Guides
(1) Monforts Model 4008 Finish Application Pad (1993); Single Dip; with Infeed
Roll; (2) Press- Type Pad Rolls; Overhead Outfeed Tensioning Roll; and Pad
Control
(1) EVAC Model MVBS.251460NF Vacuum Aspirator, (1993), 25 hp; In-line; with
Cross Range Vacuum Head; Dust Collection Filter; and Dual-Screw Vacuum Pump
(1) Mahlo Model RFMC-94H 2-Stage Pattern Straightener, (1993); with (2) Bow
Rolls; (3) Skew Rolls; and Programmable Control/Pattern Monitor
(1) Monforts Model Montex 14 GIK Clamp- Type stenter Frame, (1993); 80" w.w.
Fabric Width, Natural Gas Fired, Propane Backup, 7 -Zone, 14-Bay; with E&L
Infeed Edge Guides; stenting Chains; 75'L stenter Oven; Outfeed Tensioning
Stand; and Master Tenter Frame Control Station, with PC Control
(1) SPK Instrumentation In-Line Infrared Thermometer; with Control
(1) Monforts Model Thermex KTC-KTC In-Line Curing Oven, (1993); Natural Gas
Fired, 2- Zone, 36' Overall Oven Length, 200 Yard Total Curing Length; with
Overhead Oven Bypass Rolls; and Oven Control
(1) Monforts Model E. +A. Kombi Combination Tensioning and Cooling Stand, SIN
65939, (1993); 3-Can, 80" Face Width, 24" Can Diameter; with Chilled Water
Supply Lines; J-Box Accumulation Scray; and Stand Control
(1) Monforts A-Frame Rewind Stand; with Overhead Tensioning Rolls; (2) E&L
Model KF-2020 Edge Guides; Nip Roll Feed Stand, with Linear Foot Counter, and
Overarm Hold-Down Rewind Roll; and Control
1 Monforts Sanforizer,(1993); 80"
Roll Face, 90 Yards/Minute, Maximum Throughput, To Include:
(1) Monforts Model E.+A. Kombi Infeed Stand, (1994); A-Frame Payoff Type; with
Shaft-Driven A-Frame Unwind Station; 5-Roll Pneumatic Compensating Stand;
Overhead Infeed Nip Roll; J-Box Accumulation Scray; and Speed Control
(1) Monforts Fabric Moisturizing and Steaming Stand; with Overhead Infeed
Rolls; (2) E&L Model KF- 2020 Edge Guides; Bottom-Mounted Pull- Through Nip
Roll; Weko Biel Model RF-Aquapac II Moisturizing System, (1994), with
Stand-Mounted Moisturizing Head, 80" Fabric Width Capacity, and Weko Moisture
Monitor and Control; Overhead Fabric Steaming Can, 80" Face Width, 24" Can
Diameter; and Outfeed Tensioning Roll
(1) Monforts Model E. +A. Kombi Clamp- Type stenter Frame, (1994); 10' Overall
Frame Length; with E&L Fabric Infeed Inspection Heads; and Outfeed Tensioning
Stand, with Controls
(1) Monforts Model Monfortex Rubber Blanket Sanforizing Box, (1994); with (2)
Rubber Blanket Drive Rolls, Each with Tensioning Arm; Central Heated
Sanforizing Can, Chrome Finished, 80" Face Width, 36" Can Diameter, Gas Fired;
and Sanforizing Box Control
(1) Monforts Palmer Drying Unit; 2-Roll, 80" Face Width, Steam Fired; with
Fabric Drive Blanket; Rubber Blanket Drying Roll; and Overhead Tensioning
Stand
(1) Monforts Overhead 2-Can Chill Stand; 80" Face Width, 24" Can Diameter;
with Tensioning Roll; and Chilled Water Supply Lines
(1) Monforts Model E.+A. Kombi Inspection, Accumulation, and Rewind Stand;
with 10-Pass Festoon Accumulator; Overhead Fluorescent and Strobe Inspection
Lights; and A-Frame Type Rewind Stand, with Overarm A-Frame Hold-Down Roll,
and Shaft Drive
(1) Overall Sanforizing Line PC Control
1 Monforts Sanforizer, (1994); 80"
Roll Face, 90 Yards/Minute Maximum Throughput, To Include:
(1) Monforts Model E.+A. Kombi Infeed Stand, (1993); A-Frame Payoff Type; with
Shaft-Driven A-Frame Unwind Station; 5-Roll Pneumatic Compensating Stand;
Overhead Infeed Nip Roll; J-Box Accumulation Scray; and Speed Control
(1) Monforts Fabric Moisturizing and Steaming Stand; with Overhead Infeed
Rolls; (2) E&L Model KF- 2020 Edge Guides; Bottom-Mounted Pull- Through Nip
Roll; Weko Biel Model RF-Aquapac II , Moisturizing System, (1994), with
Stand-Mounted Moisturizing Head, 80" Fabric Width Capacity, and Weko Moisture
Monitor and Control; Overhead Fabric Steaming Can, 80" Face Width, 24" Can
Diameter; and Outfeed Tensioning Roll
(1) Monforts Model 6206 Kombi Clamp- Type Tenter Frame, (1993); 10' Overall
Frame Length; with E&L Fabric Infeed Inspection Heads; and Outfeed Tensioning
Stand, with Controls
(1) Monforts Model Monfortex Rubber Blanket Sanforizing Box, (1994); with (2)
Rubber Blanket Drive Rolls, Each with Tensioning Arm; Central Heated
Sanforizing Can, Chrome Finished, 80" Face Width, 36" Can Diameter, Gas Fired;
and Sanforizing Box Control
(1) Monforts Palmer Drying Unit; 2-Roll, 80" Face Width, Steam Fired; with
Fabric Drive Blanket; Rubber Blanket Drying Roll; and Overhead Tensioning
Stand
(1) Monforts Overhead 2-Can Chill Stand; 80" Face Width, 24" Can Diameter;
with Tensioning Roll; and Chilled Water Supply Lines
(1) Monforts Model E.+A. Kombi Inspection Accumulation and Rewind Stand, SIN
62165950, (1993); with 10-Pass Festoon Accumulator; Overhead Fluorescent and
Strobe Inspection Lights; and A-Frame Type Rewind Stand, with Overarm A-Frame
Hold-Down Roll, and Shaft Drive
(1) Overall Sanforizing Line PC Control
1 Monforts Sanforizer, (1994); 80"
Roll Face, 90 Yards/Minute Maximum Throughput, To Include:
(1) Monforts Model E.+A. Kombi Infeed Stand, (1993); A-Frame Payoff Type; with
Shaft-Driven A-Frame Unwind Station; 5-Roll Pneumatic, Compensating Stand;
Overhead Infeed Nip Roll; J-Box Accumulation Scray; and Speed Control
(1) Monforts Fabric Moisturizing and Steaming Stand; with Overhead Infeed
Rolls; (2) E&L Model KF- 2020 Edge Guides; Bottom-Mounted Pull- Through Nip
Roll; Weko Biel Model RF-Aquapac II Moisturizing System, (1993), with
Stand-Mounted Moisturizing Head, 80" Fabric Width Capacity, and Weko Moisture
Monitor and Control; Overhead Fabric Steaming Can, 80" Face Width, 24" Can
Diameter; and Outfeed Tensioning Roll
(1) Monforts Model 6206 Clamp- Type Tenter Frame, (1993); 10' Overall Frame
Length; with E&L Fabric Infeed Inspection Heads; and Outfeed Tensioning Stand,
with Controls
(1) Monforts Model Monfortex Rubber Blanket Sanforizing Box, (1993); with (2)
Rubber Blanket Drive Rolls, Each with Tensioning Arm; Central Heated
Sanforizing Can, Chrome Finished, 80" Face Width, 36" Can Diameter, Gas Fired;
and Sanforizing Box Control
(1) Monforts Palmer Drying Unit; 2-Roll, 80" Face Width, Steam Fired; with
Fabric Drive Blanket; Rubber Blanket Drying Roll; and Overhead Tensioning
Stand
(1) Monforts Overhead 2-Can Chill Stand; 80" Face Width, 24" Can Diameter;
with Tensioning Roll; and Chilled Water Supply Piping
(1) Specially Manufactured Automatic Inspection Stand; Dual Head; with
Overhead Infeed Rolls; Kalin Model V11Re Vacuum- Type Fabric Cleaning Stand,
(1999), with Stand-Mounted Vacuum Head, and Dust Collection Blower/Base; and
Elbit Vision Systems Model 1- TEX Automatic Fabric Inspection System, (1997),
with Dual PC Control
(1) Monforts Specially Manufactured A-Frame Rewind Stand; with Infeed
Tensioning Rolls; + Integrated Linear Foot Counter; and Overarm A-Frame
Hold-Down Rewind Arm, with Independent Shaft Drive
(1) Overall Sanforizing Line PC Control
Stenter, Manufacturer: Babckok (Famatex),
Year of make: 1977, Working width: 220 cm, Components at entry:Babcock
Fullard kustars, Weft streightener(make & model) : Mahalo, Selvedge cutting &
glueing: No, Type of chain: Pin+clip Horisontal, Length of entry(Chain before
the 1st chamber) :5 m, Nomber of chambers: 6
Nomber of passes: 1, Type of heating - 1,500,000 cal: Hot oil system, Working
speed: Up to 50 M, Components at exit: Rolling+folding, Cooling zone: Yes,
Steaming box: Yes, Roll up or Plaiter: folding,
Stenter, Manufacturer: KRANTZ,
Year of make: 1983, Working width: 217 cm, Components at
entry: Krantz Fullard, kustars, Weft streightener(make & model): Mahalo
Selvedge cutting & glueing: No, Pin vertical, Length of entry(Chain before the
1st chamber): 4.5 m, Nomber of chambers: 4, Nomber of passes 1, Type of
heating - 1,000,000 cal: Hot oil system, Working speed (per minute): Up to 50
M, Components at exit: Rolling+folding, Cooling zone: Yes, Steaming box: Yes,
Selvedge cuttingNo
Glueing :No, Roll up or Plaiter: folding,
Tubular Compactor, Make Ferraro,
working width 1400mm, Year 1978, totally overhauled and modernized in Year
2002. The machine is in good working condition, is equipped with 4 SEW
inverters, 2 load cells controlled by PLC, Pallet folding outlet and rolling
up, overfeeding unit with two independently driven wheels for the correction
of the weft alignment, Polyester-Nomex endless felts.
n. 01 Doubling machine RITE mod. ARD – year 1999,
60 heads, feeding 2 ends with internal creel, automatic doffing, delivery 8”
200 mm cylindrical, blower Magitex
knotter Acquasplicer.
n. 01 Doubling machine RITE mod. ARD – year 1994,
40 heads, feeding 4 ends in external creel, automatic doffing, delivery 8” 200
mm cylindrical, blower magitex
knotter Acquasplicer.
1 MAGEBA "padsteam" for ribbons or for laboratory, yoc 1987,
working width 200 mm, consisting of : unroller, padder, steamager, padder,
washing machine 2 compartments each with squeezing padder, final padder, 1
drying cylinder.
COMPLETTE FACTORY FOR HOME TEXTILES.3200 MM WW ALL MACHINE 2003 YEARS
--
REGGIANI-UNICA ROTATION PRINTING MACHINE
13 COLOURS , W.W.3300 MM.,SCREEN EQUIPPED WITH REGGIANI ENDRINGS REPEATS OF
640,725,819,914,1018. FABRIC DUST ABSORPTION UNIT AT THE ENTRENCE.3 DRYING
CHAMBER GAS HEATED,AUTOMATIC SCREEN AND BLANKET WASHING SYSTEM,BIG BATCH TO
BIG BATCH AND PLAITING EXIT
-- BRUCKNER STENTER 3400 MM WW 2003 YEARS 8 CHAMBER WITH KUSTERS
PADDING MANGLE,MAHLO WEFT STRAIGHTNER,FOR WOVEN AND
